[cisco-voip] SRST config

[Voll, Scott]

I believe you must block the router from CM also.

 

scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Montejano, Ross
Sent: Monday, October 10, 2005 1:51 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] SRST config

 

I am having an issue with testing an SRST configuration. I am blocking
the IP address of a phone to the 2 call managers in the cluster via an
acl. The phones go into fallback mode and register with the SRST router,
all seems fine. However when trying to call that phone from the outside
I just get a fast-busy, if I try to make a call to the outside world,
the router will collect the digit then after the inter-digit timeout it
gives a fast-busy. If I look at the active call it shows it matching my
dial-peer. I took the configuration from a known working set-up. Am I
doing the test incorrectly or is there something erroneous in my config?
Any thoughts would be appreciated.

 

Version of IOS is 12.3(14)

 

Application

global

  service alternate Default

 

dial-peer voice 99910199 pots

 service mgcpapp

 destination-pattern 9T

 incoming called-number .

 direct-inward-dial

 port 1/0:23

 

call-manager-fallback

 secondary-dialtone 9

 max-conferences 4 gain -6

 limit-dn 7940 2

 ip source-address x.x.x.x port 2000

 max-ephones 48

 max-dn 96 dual-line

 dialplan-pattern 1 880.... extension-length 4

 

dial-peer voice 100 pots

destination-pattern 9[2-9]......

port 1/0:23

forward-digits 7

 

dial-peer voice 101 pots

destination-pattern 91[2-9]..[2-9]......

port 1/0:23

forward-digits 11

 

TIA

 

Ross

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051010/49b20056/attachment.html