[cisco-voip] pstn gw question

[Kevin Thorngren]

Yep, that does sound strange.  Guess I would start by looking at all 
the patterns you have configured.  You can do this by going to Route 
Plan > Route Plan Report > Click on "View in File" on the right side of 
the page.  Save the CSV file and look through the patterns.

The next step would be to look at Detailed CCM traces of the call.  
Need to look at the traces from the server where the phone is 
registered.  Feel free to send the traces to me if you would like.  
Please provide the calling number called number and call time.

Kevin
On Oct 11, 2005, at 12:58 PM, Roeseler, David wrote:

> I have setup my pstn gw with basic defaults and am just trying to get 
> intial connections.
> From the IP phone on the call manager when I dial a pstn number, I get 
> a dial tone after the
> Seven digits, I then dial the number again and the call completes 
> successfully.
>  
> This is my setup
> 7970 - CCM4.1.3--3725/H323/1MFT1/à Atlas800 àFXS phone.
>  
> The fxs is 5551111
> The ip is 3651111
>  
> The calls complete either direction, however I have to dial twice?
>  
>  
> Dave Roeseler
> System Engineer
> Harris Corporation
> droesele at harris.com
>  
>  
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 3105 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20051011/2670cbf7/attachment-0001.bin