[cisco-voip] Disable dial tone

[Wes Sisk]

what's the full topology?  if you're matching a route pattern on CCM with
the 2nd digit, you can just disable 'provide outside dialtone' on that route
pattern.

/Wes

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Steve Lalonde
Sent: Tuesday, October 11, 2005 4:52 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Disable dial tone


Hi

This is probably a simple request (famous last words), I want to be able
to disable the dial tone on a voice port.

purely for cosmetic reasons.

here is what happens now

our PBX is connected to a cisco 2851 gateway.

when you pick up a handset the PBX generates a dial tone
dial any extension number and first digit stops the tone
to get an outside line you dial 9 then the number, now the fun part
when you dial the next digit the cisco generates a dial tone

this is confusing for the users and is causing a few support calls

been googling for hours and reading the archives with no luck
so how do i disable the dial tone generation?


TIA

--
Steve Lalonde RTFM
Chief Technical Officer
Entanet International Ltd
http://www.enta.net/
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip