[cisco-voip] Unity - MWI - Issue...

[ALI Rijas Mannanthara]

All,

 

 

I have CCM 3.3 with Unity 4.0 + MS exchange 2003.

 

The MWI indicators glow again even after the message being read. Once I
read the massage it goes off and hang the phone there it comes again.

 

1.	Refreshed MWI for one of the subscriber in Unity.
2.	2.From the integrations Manager  I resync the MWI.

 

Still the same. Please help in determining where should I look in to .

 

 

ALI Rijas

Systems-Network

EPBX-+91-44-22623880 Extn :6226

VoIP - 248-994-4858

Covansys India Pvt.Ltd
Confidentiality Statement:

This message is intended only for the individual or entity to which it is addressed. It may contain privileged, confidential information which is exempt from disclosure under applicable laws. If you are not the intended recipient, please note that you are strictly prohibited from disseminating or distributing this information (other than to the intended recipient) or copying this information. If you have received this communication in error, please notify us immediately by return email.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051013/af026f7a/attachment.html