[cisco-voip] RE: Availability of Unity 4.1

[Joe Toth]

Mike,

If you are upgrading from Unity 4.x you can get the CD Images from here:

https://www.cisco.com/cgi-bin/Software/FormManager/formgenerator.pl?pid=
321&fid=10944

Hope this helps

Joe Toth

Systems Engineer

CME Federal Credit Union

 

P: (614) 222-3350

F: (614) 222-3351

E: jtoth at cmefcu.org


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
cisco-voip-request at puck.nether.net
Sent: Friday, October 14, 2005 9:39 AM
To: cisco-voip at puck.nether.net
Subject: cisco-voip Digest, Vol 32, Issue 56

Send cisco-voip mailing list submissions to
	cisco-voip at puck.nether.net

To subscribe or unsubscribe via the World Wide Web, visit
	https://puck.nether.net/mailman/listinfo/cisco-voip
or, via email, send a message with subject or body 'help' to
	cisco-voip-request at puck.nether.net

You can reach the person managing the list at
	cisco-voip-owner at puck.nether.net

When replying, please edit your Subject line so it is more specific
than "Re: Contents of cisco-voip digest..."


Today's Topics:

   1. Availability of Unity 4.1 (Mike Armstrong)
   2. RE: E&M Type I question (Fretz, EA Eric @ IS)


----------------------------------------------------------------------

Message: 1
Date: Fri, 14 Oct 2005 09:36:45 -0400
From: "Mike Armstrong" <mfa at crec.ifas.ufl.edu>
Subject: [cisco-voip] Availability of Unity 4.1
To: <cisco-voip at puck.nether.net>
Message-ID: <00ad01c5d0c4$51f8e280$400cfb0a at crec.ifas.ufl.edu>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
	reply-type=original

When I went looking for Unity 4.1 last week, and was told to use the
Product 
Upgrade Tool.  Went there, and 4.1 wasn't listed.  Sent a message off to

Customer Service, got no response.  Anybody know where 4.1 is?

Mike Armstrong
UF/IFAS CREC
Lake Alfred, FL 



------------------------------

Message: 2
Date: Fri, 14 Oct 2005 08:38:32 -0500
From: "Fretz, EA Eric @ IS" <Eric.A.Fretz at L-3Com.com>
Subject: RE: [cisco-voip] E&M Type I question
To: "'Bob A. Bowie'" <bababooey at cox.net>, cisco-voip at puck.nether.net
Message-ID:
	
<51A2C3ED40A3584281444F65BC90262708F0D0CB at gvlexch02.gvl.is.l-3com.com>
Content-Type: text/plain; charset="us-ascii"

It depends on what you call "4-wire".  In the traditional sense, when
someone says "2-Wire E&M" they are only talking about the audio path.
"4-wire E&M" uses 2-pair to transport duplex audio, Tip,Ring,
tip1,ring1.
 
Type 1 E&M assumes you are using 2-wires for signaling.
 
Cheers,
Eric

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Bob A. Bowie
Sent: Friday, October 14, 2005 12:42 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] E&M Type I question


Can someone tell me on a T1 trunk, with E&M Type 1 with 4 wire, does
the signalling for all 24 ds0's happen on two of the wires and the audio
is
on the
other two wires?
 
Thanks

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
https://puck.nether.net/pipermail/cisco-voip/attachments/20051014/774d96
57/attachment.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Analog E&M Signaling Overview.pdf
Type: application/octet-stream
Size: 19526 bytes
Desc: not available
Url :
https://puck.nether.net/pipermail/cisco-voip/attachments/20051014/774d96
57/AnalogEMSignalingOverview.obj

------------------------------

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


End of cisco-voip Digest, Vol 32, Issue 56
******************************************