[cisco-voip] RE: Availability of Unity 4.1 (Mike Armstrong)

[Joe Toth]

Mike,

Now that I am looking closer at the CD Images page on CCO and the
Service Packs download page they seem to contradict each other. On the
CD Download page it says that 4.x customers need to obtain and Upgrade
Kit using the PUT.

However on the Software download page where you can download the Service
Pack CD images it says that you only need the upgrade kit for 2.x and
3.x installations. 

I haven't had a chance to read the release notes yet, so I don't know if
there is anything in there about this. 

Thanks,

Joe Toth
Systems Engineer
CME Federal Credit Union 

E: jtoth at cmefcu.org


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
cisco-voip-request at puck.nether.net
Sent: Friday, October 14, 2005 9:39 AM
To: cisco-voip at puck.nether.net
Subject: cisco-voip Digest, Vol 32, Issue 56

Send cisco-voip mailing list submissions to
	cisco-voip at puck.nether.net

To subscribe or unsubscribe via the World Wide Web, visit
	https://puck.nether.net/mailman/listinfo/cisco-voip
or, via email, send a message with subject or body 'help' to
	cisco-voip-request at puck.nether.net

You can reach the person managing the list at
	cisco-voip-owner at puck.nether.net

When replying, please edit your Subject line so it is more specific
than "Re: Contents of cisco-voip digest..."


Today's Topics:

   1. Availability of Unity 4.1 (Mike Armstrong)
   2. RE: E&M Type I question (Fretz, EA Eric @ IS)


----------------------------------------------------------------------

Message: 1
Date: Fri, 14 Oct 2005 09:36:45 -0400
From: "Mike Armstrong" <mfa at crec.ifas.ufl.edu>
Subject: [cisco-voip] Availability of Unity 4.1
To: <cisco-voip at puck.nether.net>
Message-ID: <00ad01c5d0c4$51f8e280$400cfb0a at crec.ifas.ufl.edu>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
	reply-type=original

When I went looking for Unity 4.1 last week, and was told to use the
Product 
Upgrade Tool.  Went there, and 4.1 wasn't listed.  Sent a message off to

Customer Service, got no response.  Anybody know where 4.1 is?

Mike Armstrong
UF/IFAS CREC
Lake Alfred, FL 



------------------------------

Message: 2
Date: Fri, 14 Oct 2005 08:38:32 -0500
From: "Fretz, EA Eric @ IS" <Eric.A.Fretz at L-3Com.com>
Subject: RE: [cisco-voip] E&M Type I question
To: "'Bob A. Bowie'" <bababooey at cox.net>, cisco-voip at puck.nether.net
Message-ID:
	
<51A2C3ED40A3584281444F65BC90262708F0D0CB at gvlexch02.gvl.is.l-3com.com>
Content-Type: text/plain; charset="us-ascii"

It depends on what you call "4-wire".  In the traditional sense, when
someone says "2-Wire E&M" they are only talking about the audio path.
"4-wire E&M" uses 2-pair to transport duplex audio, Tip,Ring,
tip1,ring1.
 
Type 1 E&M assumes you are using 2-wires for signaling.
 
Cheers,
Eric

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Bob A. Bowie
Sent: Friday, October 14, 2005 12:42 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] E&M Type I question


Can someone tell me on a T1 trunk, with E&M Type 1 with 4 wire, does
the signalling for all 24 ds0's happen on two of the wires and the audio
is
on the
other two wires?
 
Thanks

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
https://puck.nether.net/pipermail/cisco-voip/attachments/20051014/774d96
57/attachment.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Analog E&M Signaling Overview.pdf
Type: application/octet-stream
Size: 19526 bytes
Desc: not available
Url :
https://puck.nether.net/pipermail/cisco-voip/attachments/20051014/774d96
57/AnalogEMSignalingOverview.obj

------------------------------

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


End of cisco-voip Digest, Vol 32, Issue 56
******************************************