[cisco-voip] callmanager cluster and SRST

[Kevin Thorngren]

Looks like a name resolution issue.  Are the entries for CallManager1 
and CallManager2 listed by IP Address or name?  If by name to the 
phones have a DNS server they point to?

Or, under CCMAdmin > System > Server you can change the name to IP 
Address.

Then you should see the Active as CallManager1 and Stanby as 
CallManager2.  The TFTP server should not appear in the list and SRST 
will be CallManager3.  Failover should then work as well.

Kevin
On Oct 14, 2005, at 9:40 AM, Ahmad Cheikh Moussa wrote:

> Hi!
>
> I have a cluster of two callmanager and one SRST.
> CCM1 = Publisher (1.1.1.1)
> CCM2 = Subscriber (1.1.1.2)
> SRST = VoiceGateway (1.1.1.3)
>
> My Phone displays following config:
> Callmanager 1      : ccm2
> Callmanager 2      : ccm1
> Callmanager 3 TFTP : 1.1.1.2 Active
> Callmanager 4 SRST : 1.1.1.3 Standby
> Callmanager 5      : empty
>
> So last time I made a test. I wanted to see, what happens,
> when my subscriber fails. I have shut down the subscriber and
> looked what the phone did. The phone did not register to the
> publisher, it has registered to the SRST.
> The publihser was all the reachable and had no problems.
>
> Any ideas, why the phone has registered to the SRST ?
> Why do I see only one tftp Server on the Phone ?
> The publisher has a tftp server too.
>
> Thanks in advance,
>   Ahmad
>
> -- 
> Ahmad Cheikh-Moussa
> NetUSE AG
> Dr.-Hell-Straße, 24107 Kiel, Germany
> Telefon: +49 431 2390 400 --  Telefax: +49 431 2390 499
> Service: Service at NetUSE.DE --  http://NetUSE.DE/
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>