[cisco-voip] 2801 as h323 to CCM

[Kevin Thorngren]

Hi Greg,

An H.323 GW won't register with CCM.  If the IP Address is list as in 
the example below then the GW and CCM have been communicating.   But 
the registration status will be unknown.

Product : H.323 Gateway
Gateway : 10.1.1.1
Device Protocol: H.225
Registration: Unknown
IP Address: 10.1.1.1       <<<<<

You will need to modify the current Route Patterns to point to the new 
H.323 GW or Route List and configure the appropriate dial peers on the 
GW.

Kevin

On Sep 16, 2005, at 3:37 PM, Greg McAllister wrote:

> Hi Kevin,
> Well, it’s currently config’d (and operating, of course) in CCM as an 
> MGCP gateway and they want it H323 so they can get CID. I’m probably 
> making it harder than necessary, but was hoping to still use the CCM 
> dial-plan and just define the FXO ports in the 2801 as h323 as 
> necessary. The 2801 won’t register with the CCM – it’s defined in CCM 
> with the IP addr as the name . .
> Thanks.
>  
>
> From: Kevin Thorngren [mailto:kthorngr at cisco.com]
> Sent: Friday, September 16, 2005 2:25 PM
> To: Greg McAllister
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] 2801 as h323 to CCM
>  
>
> Hi Greg,
>
>  I haven't specifically configured a 2801 as an H.323 GW with CCM but 
> don't anticipate any issues as CCM does not care about the specific 
> platform when using H.323. Are you having a specific issue?
>
>  Kevin
>  On Sep 16, 2005, at 1:43 PM, Greg McAllister wrote:
> Greetings:
>  Am trying to config a 2801 as an H323 Gateway to Cisco Call Manager. 
> Anyone done this?
>  Thanks._______________________________________________
>  cisco-voip mailing list
>  cisco-voip at puck.nether.net
>  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 3956 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20050916/4dc91881/attachment.bin