[cisco-voip] 2801 as h323 to CCM

[Greg McAllister]

Interesting - Your example is exactly what's currently displayed. The 2801
H323 status shows not-registered also.

The current designation for it in CCM as the MGCP GW is the URL -- CCM would
not allow using the same name for the H323 GW. Does what you say then mean
that I can use it in the current state and build a CCM Route to the GW IP
addr and make calls through the H323 ports with a dialpeer match?

Thanks. Have a good weekend.

Greg.

 

  _____  

From: Kevin Thorngren [mailto:kthorngr at cisco.com] 
Sent: Friday, September 16, 2005 3:12 PM
To: gregmcallister at mchsi.com
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 2801 as h323 to CCM

 

Hi Greg,

An H.323 GW won't register with CCM. If the IP Address is list as in the
example below then the GW and CCM have been communicating. But the
registration status will be unknown.

Product : H.323 Gateway
Gateway : 10.1.1.1
Device Protocol: H.225
Registration: Unknown
IP Address: 10.1.1.1 <<<<<

You will need to modify the current Route Patterns to point to the new H.323
GW or Route List and configure the appropriate dial peers on the GW.

Kevin

On Sep 16, 2005, at 3:37 PM, Greg McAllister wrote:

Hi Kevin,
Well, it's currently config'd (and operating, of course) in CCM as an MGCP
gateway and they want it H323 so they can get CID. I'm probably making it
harder than necessary, but was hoping to still use the CCM dial-plan and
just define the FXO ports in the 2801 as h323 as necessary. The 2801 won't
register with the CCM - it's defined in CCM with the IP addr as the name . .
Thanks.
 

From: Kevin Thorngren [mailto:kthorngr at cisco.com]
Sent: Friday, September 16, 2005 2:25 PM
To: Greg McAllister
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 2801 as h323 to CCM
 

Hi Greg,

I haven't specifically configured a 2801 as an H.323 GW with CCM but don't
anticipate any issues as CCM does not care about the specific platform when
using H.323. Are you having a specific issue?

Kevin
On Sep 16, 2005, at 1:43 PM, Greg McAllister wrote:
Greetings:
Am trying to config a 2801 as an H323 Gateway to Cisco Call Manager. Anyone
done this?
Thanks._______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050916/ba1e4a97/attachment-0001.html