[cisco-voip] Managing Inactive Directory Numbers

Lelio Fulgenzi lelio at uoguelph.ca
Sat Apr 1 18:41:59 EST 2006


The only way to remove unassigned DNs is through the route plan screen. As far as I know.

I just recently found that not only does this contain deleted DNs, but if you create a phone, say DN 12345 in PT_A, and then decide to move it to PT_B, the system puts 12345/PT_A in the unassigned DN category.  :(

  ----- Original Message ----- 
  From: Pritchard, Jon 
  To: cisco-voip at puck.nether.net 
  Sent: Saturday, April 01, 2006 6:33 PM
  Subject: [cisco-voip] Managing Inactive Directory Numbers


  Anyone know of a good way to manage inactive directory numbers (DN's not
  associated to any device) in CCM 4.1?  These orphaned DN's appear to
  occur when a DN is changed on device vs. removed.  So far the only way
  I've been able to access them is via Route Plan Report.

  Thanks,
  Jon


  This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.

  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060401/ae179d70/attachment.html 


More information about the cisco-voip mailing list