[cisco-voip] CCM 4.1(3)sr2 and MGCP Gateway C2621-XM

[Jose Mujica]

Hi.

I have a Cisco 2621XM with a NM-HDV2-1T1/E1 configured on the CallManager as a
MGCP gateway. The MGCP gateway T1/PRI endpoint shows up on the correct slot
1/0. That is the onboard T1 port within the NM. Now I would like to add
another VWIC-1MFT-T1 to the VIC available on the NM-HDV2 card but when I add
that on CallManager it also shows up at 1/0.

Any ideas? If I add a VIC2-4FXO on the CCM web page it add the ports as
1/0/0-1/0/3.

Thanks in advanced,
-Jose