[cisco-voip] 7941G, 7961G Power Draw/Capacity with Cat 3560/3750 48pt switch

[Craig M Staffin]

well I know the 7940 and 60 if you wanted to support all 48 phones you had 
to do a max inline power statemnet on each port







"Carter, Bill" <bcarter at sentinel.com>
Sent by: cisco-voip-bounces at puck.nether.net
04/20/2006 01:47 PM
 
        To:     <cisco-voip at puck.nether.net>
        cc: 
        Subject:        [cisco-voip] 7941G,     7961G Power Draw/Capacity 
with Cat 3560/3750 48pt switch


Can a 48 port Catalyst 3560 or Catalyst 3750 handle 48 79X1G phones 
pulling PoE from the switch?


This email may contain proprietary and confidential information for the 
sole use of the intended recipient. 
Any review, retransmission, dissemination, or other use of this 
information by persons or entities other than 
the intended recipient is prohibited. If you are not the intended 
recipient, please contact the sender and 
delete all copies. To the extent that opinions are expressed in this 
message, they are not necessarily the 
opinions of Sentinel Technologies or any of its affiliates, employees, 
directors, officers or shareholders.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060420/9dc3af6b/attachment.html