[cisco-voip] Multi-tenant configuration for call manager

Vincent De Keyzer vincent at dekeyzer.net
Fri Apr 21 10:05:23 EDT 2006


Hi there,

you define a partition for each tenant, and a calling search space that
includes the partition of the tenant plus other partitions that they may
call (such as outside numbers, voicemail, etc.). Quite easy, actually. 

The only thing that is not quite multi-tenant is the corporate directory.

Is that enough documentation for you? :)

Vincent

> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-
> bounces at puck.nether.net] On Behalf Of Manoj Kalpage
> Sent: vendredi 21 avril 2006 15:58
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Multi-tenant configuration for call manager
> 
> Hi All
> Does anybody know good documentation for multi-tenant setup. I have been
> looking for some good documentations about multi-tenanting setup. I have
> to setup call manager for twenty different clients for twenty different
> range of extension numbers. Also, clients call between different extension
> ranges should block. Gateway is MGCP with three T1 PRI circuits. any
> information would be greatly appreciated.
> Thanks you in advance.
> 
> Regards,
> Manoj
> 
> __________________________________________________________________________
> _________
> Manoj Kalpage, System Engineer | Computec Engineering Ltd., | Prince
> Avenue Bldg, 7th Floor, 3-33 Kioicho, Chiyoda Ku, Tokyo 102-0094 | direct:
> 03 3511 8274 | main: 03 3511 8190 | direct fax: 03 3511 8198 | Mobile 090
> 849 15449  | manoj at computec.co.jp
> 
> 
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip



More information about the cisco-voip mailing list