[cisco-voip] Multi-tenant configuration for call manager
Fedorov, Konstantin
kfedor at amt.ru
Fri Apr 21 10:16:31 EDT 2006
Hi,
I know one provider, which implement multi-tenant/
And obtain a headache :)
Because, Such things like AutoAttendant, directory
Doesn't work well in such configuration.
>From my opinion, CCM this pure Enterprise solution for one company/
But, I also know that British Telecom, use CCM for it clients, but
Solution:
One client - one CCM cluster, This work fine.
-----------------------
Sincerely Yours,
Konstantin Fedorov
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Manoj Kalpage
Sent: Friday, April 21, 2006 5:58 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Multi-tenant configuration for call manager
Hi All
Does anybody know good documentation for multi-tenant setup. I have been
looking for some good documentations about multi-tenanting setup. I have
to setup call manager for twenty different clients for twenty different
range of extension numbers. Also, clients call between different
extension ranges should block. Gateway is MGCP with three T1 PRI
circuits. any information would be greatly appreciated.
Thanks you in advance.
Regards,
Manoj
________________________________________________________________________
___________
Manoj Kalpage, System Engineer | Computec Engineering Ltd., | Prince
Avenue Bldg, 7th Floor, 3-33 Kioicho, Chiyoda Ku, Tokyo 102-0094 |
direct: 03 3511 8274 | main: 03 3511 8190 | direct fax: 03 3511 8198 |
Mobile 090 849 15449 | manoj at computec.co.jp
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
More information about the cisco-voip
mailing list