[cisco-voip] Multi-tenant configuration for call manager

Manoj Kalpage manoj at computec.co.jp
Fri Apr 21 10:51:34 EDT 2006


Hi Vincent,
Thank you  very much for your information. just to make sure do I need to create both partitions and Calling search space for each tenant?  Can I share common partition between tenant? I have just line up CSS and partitions which I am planning to use for new implementation. Am I missing anything? I hope I can block inter-tenant calling using this CSS partitions ???
 
Regards,
Manoj
 
 
Tenant_1_Internal_CSS
       Tenant_1_DID_Partition
                1XXX
       Emergency_ Partition
                9.110
                9.119
 
Tenant_1_Local_CSS
       Tenant_1_DID_Partition
                1XXX
       Emergency_ Partition
                9.110 
                9.119
       Local_Partition
               9.[1-9]XXXXXXX
                
Tenant_1_National_CSS
        Tenant_1_DID_Partition 
                1XXX
       Emergency_ Partition
                9.110 
                9.119
       Local_Partition
               9.[1-9]XXXXXXX       
       National_Partition
               9.0[1-9]XXXXXXX       
      
Tenant_1_International_CSS
        Tenant_1_DID_Partition 
                1XXX
       Emergency_ Partition
                9.110 
                9.119
       Local_Partition
               9.[1-9]XXXXXXX       
       National_Partition
               9.0[1-9]XXXXXXX       
       International_Partition
               9.001010!
               9.001010!#
               9.010!
               9.010!#
 
Tenant_2_Internal_CSS
       Tenant_1_DID_Partition
                2XXX
       Emergency_ Partition
                9.110
                9.119
 
Tenant_2_Local_CSS
       Tenant_1_DID_Partition
                2XXX
       Emergency_ Partition
                9.110 
                9.119
       Local_Partition
               9.[1-9]XXXXXXX
                
Tenant_2_National_CSS
        Tenant_1_DID_Partition 
                2XXX
       Emergency_ Partition
                9.110 
                9.119
       Local_Partition
               9.[1-9]XXXXXXX       
       National_Partition
               9.0[1-9]XXXXXXX       
      
Tenant_2_International_CSS
        Tenant_2_DID_Partition 
                2XXX
       Emergency_ Partition
                9.110 
                9.119
       Local_Partition
               9.[1-9]XXXXXXX       
       National_Partition
               9.0[1-9]XXXXXXX       
       International_Partition
               9.001010!
               9.001010!#
               9.010!
               9.010!#
___________________________________________________________________________________ 
Manoj Kalpage, System Engineer | Computec Engineering Ltd., | Prince Avenue Bldg, 7th Floor, 3-33 Kioicho, Chiyoda Ku, Tokyo 102-0094 | direct: 03 3511 8274 | main: 03 3511 8190 | direct fax: 03 3511 8198 | Mobile 090 849 15449  | manoj at computec.co.jp 
  

________________________________

From: Vincent De Keyzer [mailto:vincent at dekeyzer.net]
Sent: Fri 4/21/2006 11:05 PM
To: Manoj Kalpage
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Multi-tenant configuration for call manager



Hi there,

you define a partition for each tenant, and a calling search space that
includes the partition of the tenant plus other partitions that they may
call (such as outside numbers, voicemail, etc.). Quite easy, actually.

The only thing that is not quite multi-tenant is the corporate directory.

Is that enough documentation for you? :)

Vincent

> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-
> bounces at puck.nether.net] On Behalf Of Manoj Kalpage
> Sent: vendredi 21 avril 2006 15:58
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Multi-tenant configuration for call manager
>
> Hi All
> Does anybody know good documentation for multi-tenant setup. I have been
> looking for some good documentations about multi-tenanting setup. I have
> to setup call manager for twenty different clients for twenty different
> range of extension numbers. Also, clients call between different extension
> ranges should block. Gateway is MGCP with three T1 PRI circuits. any
> information would be greatly appreciated.
> Thanks you in advance.
>
> Regards,
> Manoj
>
> __________________________________________________________________________
> _________
> Manoj Kalpage, System Engineer | Computec Engineering Ltd., | Prince
> Avenue Bldg, 7th Floor, 3-33 Kioicho, Chiyoda Ku, Tokyo 102-0094 | direct:
> 03 3511 8274 | main: 03 3511 8190 | direct fax: 03 3511 8198 | Mobile 090
> 849 15449  | manoj at computec.co.jp
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip






More information about the cisco-voip mailing list