[cisco-voip] Unity MWI port Question
Lelio Fulgenzi
lelio at uoguelph.ca
Tue Apr 25 11:43:36 EDT 2006
I don't know which is harder, figuring out the IPCC Express licencing and naming or MWI.
I've seen plenty of times where MWI uses more than two ports. Problem is, it's never when we want.
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Network Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Sanity First : Number of days with fewer than
50 messages in my inbox at the end of the day: buffer overrun
----- Original Message -----
From: Simon, Bill
To: 'cisco-voip at puck-nether.net Voip'
Sent: Tuesday, April 25, 2006 11:34 AM
Subject: Re: [cisco-voip] Unity MWI port Question
I agree that this should work, but what we are saying is that enabling more
MWI ports does not do anything. Unity only seems to use 2 ports max no
matter how many are enabled.
> -----Original Message-----
> From: tomlemay at adelphia.net [mailto:tomlemay at adelphia.net]
> Sent: Tuesday, April 25, 2006 11:29 AM
> To: Simon, Bill
> Cc: 'cisco-voip at puck-nether.net Voip'
> Subject: Re: [cisco-voip] Unity MWI port Question
>
> I am having a MWI issue which I working on with TAC at the
> meoment. We have only one port designated at the moment for
> MWI dial out notification and about 1400 users. Some users
> report that they get their MWI light to turn on but then
> there is no new message. Tac said we need to enable more MWI
> ports just for out bound MWI notification and to do this you
> go into nity tools under switch interface and click on the
> ports tab. then, select MWI and enabled just for the number
> of ports you want to dial out for MWI notification.
>
> Tom
>
> ---- "Simon wrote:
> > I'm with you; I've seen this same behavior (only two MWI
> ports actually
> > used) and our MWI resynchs take about 6-7 hours for our
> 6000 subscribers.
> > It's really painful, and even if we schedule them to begin
> at midnight it's
> > still going when some users come in in the morning.
> >
> >
> > ---
> > Bill Simon - bills at tns.its.psu.edu - (814) 865-2270
> > http://tns.its.psu.edu/ <http://tns.its.psu.edu/>
> >
> >
> >
> >
> >
> >
> > _____
> >
> > From: Ed Leatherman [mailto:ealeatherman at gmail.com]
> > Sent: Tuesday, April 25, 2006 10:32 AM
> > To: cisco-voip at puck-nether.net Voip
> > Subject: [cisco-voip] Unity MWI port Question
> >
> >
> > Hello all,
> >
> > Does anyone know how to make Unity (4.0) use more than 2-3
> ports for MWI? I
> > have more than 3 ports configured in UTIM for MWI Dialout,
> but when I do a
> > MWI Resynch it still only uses up to 3 ports.. I'm not sure
> where else to
> > set this. The reason I ask is my MWI weirded out this
> morning and I had to
> > force it to resynch and its been going for 2 hours now..
> watching it in the
> > part status monitor window and I think new change requests
> are just getting
> > queued up behind the resynch job.
> >
> > Thanks!
> > --
> > Ed Leatherman
> > IP Telephony Coordinator
> > West Virginia University
> > Telecommunications and Network Operations
> >
>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060425/d10db7c6/attachment.html
More information about the cisco-voip
mailing list