[cisco-voip] Caller-ID Question

[Ryan Ratliff]

He was referring to CallManager receiving caller name display, not CME.

I don't have a CME router to test with but is there a command  
available under the serial port for the PRI 'isdn incoming display- 
ie'?  I know the command will be there for outgoing calls.

I can't say what specific types of inbound calling name display CME  
supports.  There are a few different ways the telco can send it.

-Ryan

On Aug 3, 2006, at 12:18 PM, Israel Lang wrote:

I see the caller-id coming in, but not on the phone. My guess is CME  
doesn't use MGCP and that is the problem. Any seconds to that notion?

On 8/3/06, Adam Blomfield <adman at adman.net> wrote: It is possible to  
get calling name information over a PRI however to
achieve this you must be using the NI2 ISDN protocol on the trunk and
it must be connected to CallManager through an MGCP gateway. Any other
ISDN protocols or an H.323 gateway will not work. You may see the name
information in an q931 debug but it will not be passed to the phone.

On 8/3/06, Israel Lang < zephy316 at gmail.com> wrote:
 > I have a CME 4 system w/ a PRI to the telco. I fail to recall if I  
can get
 > caller-id over the PRI. I know I can get the calling number  
displayed, but
 > my question is can I get calling name displayed on incoming calls?
 >
 >  Thanks.
 >
 > --
 > Have a great day!!!!!!!!!!
 > zephy316_gmail.com
 >
 > Replace the _ with an @ symbol
 > _______________________________________________
 > cisco-voip mailing list
 > cisco-voip at puck.nether.net
 > https://puck.nether.net/mailman/listinfo/cisco-voip
 >
 >
 >



-- 
Have a great day!!!!!!!!!!
zephy316_gmail.com

Replace the _ with an @ symbol
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip