[cisco-voip] Caller-ID Question

[Israel Lang]

I see the caller-id coming in, but not on the phone. My guess is CME doesn't
use MGCP and that is the problem. Any seconds to that notion?

On 8/3/06, Adam Blomfield <adman at adman.net> wrote:
>
> It is possible to get calling name information over a PRI however to
> achieve this you must be using the NI2 ISDN protocol on the trunk and
> it must be connected to CallManager through an MGCP gateway. Any other
> ISDN protocols or an H.323 gateway will not work. You may see the name
> information in an q931 debug but it will not be passed to the phone.
>
> On 8/3/06, Israel Lang <zephy316 at gmail.com> wrote:
> > I have a CME 4 system w/ a PRI to the telco. I fail to recall if I can
> get
> > caller-id over the PRI. I know I can get the calling number displayed,
> but
> > my question is can I get calling name displayed on incoming calls?
> >
> >  Thanks.
> >
> > --
> > Have a great day!!!!!!!!!!
> > zephy316_gmail.com
> >
> > Replace the _ with an @ symbol
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
> >
>



-- 
Have a great day!!!!!!!!!!
zephy316_gmail.com

Replace the _ with an @ symbol
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060803/1eaa7ae0/attachment.html