[cisco-voip] Caller-ID Question

[Israel Lang]

Looks like it is a facility message:

Aug  3 14:40:32.499: ISDN Se0/0/0:23 Q931: RX <- FACILITY pd = 8  callref =
0x00
84
        Facility i =
0x9F8B0100A117020179020100800F4E45544741494E20494E464F20535
9
                Protocol Profile =  Networking Extensions
                0xA117020179020100800F4E45544741494E20494E464F205359
                Component = Invoke component
                        Invoke Id = 121
                        Operation = CallingName
                                Name presentation allowed
                                Name = ********************

On 8/3/06, Ryan Ratliff <rratliff at cisco.com> wrote:
>
> You need to find out how your telco is providing the calling name.
> Is it in a display IE in the Setup message (this should work)?  In a
> Facility message (see CSCeg80845)?
>
> -Ryan
>
> On Aug 3, 2006, at 12:28 PM, Ryan Ratliff wrote:
>
> He was referring to CallManager receiving caller name display, not CME.
>
> I don't have a CME router to test with but is there a command
> available under the serial port for the PRI 'isdn incoming display-
> ie'?  I know the command will be there for outgoing calls.
>
> I can't say what specific types of inbound calling name display CME
> supports.  There are a few different ways the telco can send it.
>
> -Ryan
>
> On Aug 3, 2006, at 12:18 PM, Israel Lang wrote:
>
> I see the caller-id coming in, but not on the phone. My guess is CME
> doesn't use MGCP and that is the problem. Any seconds to that notion?
>
> On 8/3/06, Adam Blomfield <adman at adman.net> wrote: It is possible to
> get calling name information over a PRI however to
> achieve this you must be using the NI2 ISDN protocol on the trunk and
> it must be connected to CallManager through an MGCP gateway. Any other
> ISDN protocols or an H.323 gateway will not work. You may see the name
> information in an q931 debug but it will not be passed to the phone.
>
> On 8/3/06, Israel Lang < zephy316 at gmail.com> wrote:
> > I have a CME 4 system w/ a PRI to the telco. I fail to recall if I
> can get
> > caller-id over the PRI. I know I can get the calling number
> displayed, but
> > my question is can I get calling name displayed on incoming calls?
> >
> >  Thanks.
> >
> > --
> > Have a great day!!!!!!!!!!
> > zephy316_gmail.com
> >
> > Replace the _ with an @ symbol
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
> >
>
>
>
> --
> Have a great day!!!!!!!!!!
> zephy316_gmail.com
>
> Replace the _ with an @ symbol
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
Have a great day!!!!!!!!!!
zephy316_gmail.com

Replace the _ with an @ symbol
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060803/619cf90f/attachment.html