[cisco-voip] Wtrlt: Antw: H323 Trunk Group?

[Robert Schuknecht]

>>> Robert Schuknecht (rschuknecht at gmx.de) schrieb am Samstag, 5. August 2006 um
01:48:36 in Nachricht <44D3F8F3.5E3C.0004.0 at gmx.de>:
> Yes thats possible.
> 
> Here is an example config:
> 
> ---
> !
> trunk group  S2M
> !
> !
> controller E1 0/0/0
>  pri-group timeslots 1-31
> !
> controller E1 0/0/1
>  pri-group timeslots 1-31
> !
> controller E1 0/1/0
>  pri-group timeslots 1-31
> !
> interface Serial0/0/0:15
>  no ip address
>  isdn switch-type primary-net5
>  isdn overlap-receiving
>  isdn incoming-voice voice
>  isdn send-alerting
>  isdn sending-complete
>  trunk-group S2M
>  no cdp enable
> !
> interface Serial0/0/1:15
>  no ip address
>  isdn switch-type primary-net5
>  isdn overlap-receiving
>  isdn incoming-voice voice
>  isdn send-alerting
>  isdn sending-complete
>  trunk-group S2M
>  no cdp enable
> !
> interface Serial0/1/0:15
>  no ip address
>  isdn switch-type primary-net5
>  isdn overlap-receiving
>  isdn incoming-voice voice
>  isdn send-alerting
>  isdn sending-complete
>  trunk-group S2M
>  no cdp enable
> !
> !
> dial-peer voice 1 pots
>  trunkgroup S2M
>  description ---- To PSTN
>  destination-pattern 0.T
>  progress_ind setup enable 3
>  progress_ind alert enable 8
>  trunk-group-label source S2M
>  fax rate disable
>  direct-inward-dial
> !
> 
> /Robert
> 
> >>> Jimmy Pale<voipjockey at gmail.com> schrieb am Freitag, 4. August 2006 um 
> 23:50:13
> in Nachricht cd928c07d03b7e4d828033ee11b188fa:
> > If I have 4 PRI's on a single H323 gateway is it possible to set those up in
> > a "trunk group" and have my outgoing pots dial-peer just point to the "trunk
> > group"? Or is the only way to setup 4 different pots dial-peers with
> > preferences? If it is possible can someone provide a config example?
> > 
> >  
> > 
> >  
> > 
> >  
> > 
> >  
>