[cisco-voip] Setting up local DSP resources on 2821
Ted Nugent
tednugent69 at yahoo.com
Tue Aug 8 08:53:50 EDT 2006
None, so thats your problem.. I'd check the DSP Calc
and confirm your numbers but it sounds like you need
another PVDM to add the conferencing.
--- "Ortiz, Carlos" <CORTIZ at broward.org> wrote:
> No, just the PVDM2-32. I'm going to check the DSP
> calculator next, but
> how many DSP's would this config leave me with? Here
> is the full sh
> diag:
>
> Lowrise#sh diag
> Slot 0:
> C2811 Motherboard with 2FE and integrated
> VPN Port adapter, 2
> ports
> Port adapter is analyzed
> Port adapter insertion time unknown
> EEPROM contents at hardware discovery:
> PCB Serial Number : FOC1016457N
> Hardware Revision : 1.0
> Top Assy. Part Number : 800-26920-01
> Board Revision : A0
> Deviation Number : 0
> Fab Version : 03
> RMA Test History : 00
> RMA Number : 0-0-0-0
> RMA History : 00
> Processor type : 87
> Hardware date code : 20060424
> Chassis Serial Number : FTX1020A5KQ
> Chassis MAC Address : 0017.95aa.9750
> MAC Address block size : 24
> CLEI Code : CNMJ7P0BRB
> Product (FRU) Number : CISCO2811
> Part Number : 73-10258-03
> Version Identifier : V02
> EEPROM format version 4
> EEPROM contents (hex):
> 0x00: 04 FF C1 8B 46 4F 43 31 30 31 36 34
> 35 37 4E 40
> 0x10: 03 E7 41 01 00 C0 46 03 20 00 69 28
> 01 42 41 30
> 0x20: 88 00 00 00 00 02 03 03 00 81 00 00
> 00 00 04 00
> 0x30: 09 87 83 01 32 19 08 C2 8B 46 54 58
> 31 30 32 30
> 0x40: 41 35 4B 51 C3 06 00 17 95 AA 97 50
> 43 00 18 C6
> 0x50: 8A 43 4E 4D 4A 37 50 30 42 52 42 CB
> 8F 43 49 53
> 0x60: 43 4F 32 38 31 31 20 20 20 20 20 20
> 82 49 28 12
> 0x70: 03 89 56 30 32 20 D9 02 40 C1 FF FF
> FF FF FF FF
>
> PVDM Slot 0:
> 32-channel (G.711) Voice/Fax PVDMII DSP SIMM
> PVDM daughter card
> Hardware Revision : 4.0
> Part Number : 73-8539-05
> Board Revision : A0
> Deviation Number : 0
> Fab Version : 04
> PCB Serial Number : FOC101818WH
> RMA Test History : 00
> RMA Number : 0-0-0-0
> RMA History : 00
> Processor type : 00
> Product (FRU) Number : PVDM2-32
> Version Identifier : V01
> EEPROM format version 4
> EEPROM contents (hex):
> 0x00: 04 FF 40 03 EE 41 04 00 82 49 21 5B
> 05 42 41 30
> 0x10: 88 00 00 00 00 02 04 C1 8B 46 4F 43
> 31 30 31 38
> 0x20: 31 38 57 48 03 00 81 00 00 00 00 04
> 00 09 00 CB
> 0x30: 88 50 56 44 4D 32 2D 33 32 89 56 30
> 31 20 D9 02
> 0x40: 40 C1 FF FF FF FF FF FF FF FF FF FF
> FF FF FF FF
> 0x50: FF FF FF FF FF FF FF FF FF FF FF FF
> FF FF FF FF
> 0x60: FF FF FF FF FF FF FF FF FF FF FF FF
> FF FF FF FF
> 0x70: FF FF FF FF FF FF FF FF FF FF FF FF
> FF FF FF FF
>
> WIC Slot 0:
> FT1 PMC4351
> Hardware Revision : 1.2
> PCB Serial Number : FOC10173EL3
> Part Number : 73-8346-05
> Board Revision : A0
> RMA Test History : 00
> RMA Number : 0-0-0-0
> RMA History : 00
> Deviation Number : 0-0
> Product (FRU) Number : WIC-1DSU-T1-V2
>
> Top Assy. Part Number : 800-22193-03
> CLEI Code : IPUIAPRRAA
> EEPROM format version 4
> EEPROM contents (hex):
> 0x00: 04 FF 40 00 52 41 01 02 C1 8B 46 4F
> 43 31 30 31
> 0x10: 37 33 45 4C 33 82 49 20 9A 05 42 41
> 30 03 00 81
> 0x20: 00 00 00 00 04 00 80 00 00 00 00 CB
> 94 57 49 43
> 0x30: 2D 31 44 53 55 2D 54 31 2D 56 32 20
> 20 20 20 20
> 0x40: 20 C0 46 03 20 00 56 B1 03 C6 8A 49
> 50 55 49 41
> 0x50: 50 52 52 41 41 FF FF FF FF FF FF FF
> FF FF FF FF
> 0x60: FF FF FF FF FF FF FF FF FF FF FF FF
> FF FF FF FF
> 0x70: FF FF FF FF FF FF FF FF FF FF FF FF
> FF FF FF FF
>
> WIC Slot 1:
> T1 (1 port) Multi-Flex Trunk WAN daughter
> card
> Hardware revision 1.0 Board
> revision B0
> Serial number 34799286 Part number
> 800-03568-04
> FRU Part Number VWIC-1MFT-T1=
> Test history 0x0 RMA number
> 00-00-00
> Connector type PCI
> EEPROM format version 1
> EEPROM contents (hex):
> 0x20: 01 20 01 00 02 12 FE B6 50 0D F0 04
> 00 00 00 00
> 0x30: 58 00 00 00 06 04 27 00 FF FF FF FF
> FF FF FF FF
>
> -----Original Message-----
> From: Ted Nugent [mailto:tednugent69 at yahoo.com]
> Sent: Monday, August 07, 2006 4:26 PM
> To: Ortiz, Carlos; Ryan Ratliff
> Cc: Erik Erasmus (E); cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Setting up local DSP
> resources on 2821
>
> Are you showing the PVDM2-16 as well?
> You can try changing the codec complexity but I
> believe this is already the default
>
> voice-card 0
> codec complexity flex
>
>
> Here's a "snippet" from the DSP calc
>
> ======================
> voice-card 0
> codec complexity flex
>
> Set of Conferencing/Transcoding commands when used
> with PVDM2-XX DSPs:
> sccp local <local interface>
> sccp ccm <call manager IP address> identifier <ccm
> ID
> #> version <version #>
> sccp
> !
> sccp ccm group 999
> bind interface <local interface>
> associate ccm <ccm ID #> priority 1
> associate profile <conferencing profile ID #>
> register <conference bridge name>
> associate profile <transcoding profile ID #>
> register <transcoder name>
> !
> dspfarm profile <transcoding profile ID #> transcode
>
> maximum sessions 4
> associate application SCCP
>
> dspfarm profile <conferencing profile ID #>
> conference
>
> maximum sessions 2
> associate application SCCP
>
> ====================
>
>
>
>
>
> --- "Ortiz, Carlos" <CORTIZ at broward.org> wrote:
>
> > In this case I am configuring a 2811 running
> > 12.4(9)T. The show diag
> > shows me this whick makes sense since I ordered
> the
> > PVDM 16 to 32
> > upgrade :
> >
> > PVDM Slot 0:
>
=== message truncated ===
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
More information about the cisco-voip
mailing list