[cisco-voip] Unity 4.0(4) failover license key?

[Jason Aarons (US)]

Will the original license file on the Primary be replaced with a single
lic file? Or does this new .lic file just add Failover to existing and
they will have two .lic files on Primary?

-----Original Message-----
From: tomlemay at adelphia.net [mailto:tomlemay at adelphia.net] 
Sent: Wednesday, August 09, 2006 11:56 AM
To: Jason Aarons (US)
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Unity 4.0(4) failover bundle with Exchange
2000

Regarding the license  key, you do need to run the failover license key
on the  primary server in order to inform the primary that there is a
secondary failover server configured.

You also need to run the telephony integration manager on the failover
unity so that the ports on the  failover unity will register with the
Cisco Call manager.  As mentioned earlier, the ports on the secondary
failover server have to be different in terms of extension numbers (they
can be phantom numbers or DID).

Tom
---- "Jason Aarons (US)" <jason.aarons at us.didata.com> wrote: 
> Funny, I'm about to do my first failover setup this Thursday and
Friday,
> and putting in production on Saturday pm.
> 
> >From reading the guides;
> Cisco Unity Faillover Configuration and Administration Guide.pdf
> Cisco Unity Reconfiguration and Upgrade.pdf
> 
> 
> I assume the below;
> 
> 1) Just building another server, the 3 Unity service accounts need
same
> username/password are Primary Server
> 2) Voicemail Ports Secondary Server are different then Primary Server
> 3) new Server has different ip address, different hostname
> 4) Make sure they have recent DiRT backup of Primary Server 
> 5) Make sure they have recent Veritas backup of Primary Server
> 6) Need to upgrade Primary from MSDE to SQL 2000 before building new
> Secondary.
> 
> Do you know if the license key (*.lic) of the Primary Server needs to
> change?
> 
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Simon, Bill
> Sent: Wednesday, August 09, 2006 10:47 AM
> To: Cisco Voip
> Subject: [cisco-voip] Unity 4.0(4) failover
> 
> Looking for any special install notes/gotchas from people who have
setup
> 
> Unity 4 in a failover situation.  We're preparing to do it this
weekend.
> 
>   Engineering group tested it but I just want to see if any of you 
> encountered anything that strayed from Cisco's docs or your
common-sense
> 
> expectations.
> 
> Thanks
> Bill
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> -----------------------------------------
> Disclaimer:
> 
> This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the
> designated addressee(s) named above only.  If you are not the
> intended addressee, you are hereby notified that you have received
> this communication in error and that any use or reproduction of
> this email or its contents is strictly prohibited and may be
> unlawful.  If you have received this communication in error, please
> notify us immediately by replying to this message and deleting it
> from your computer. Thank you.
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip


-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.