[cisco-voip] Unity 4.0(4) failover license key?

Philip Walenta pwalenta at wi.rr.com
Wed Aug 9 12:55:44 EDT 2006


The new license will be added to the server.  You will have existing license
files + 1.

As for the failover server, when you run the install and select it as a
failover server, it automatically pulls the proper license information from
the existing primary server. 

> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net 
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of 
> Jason Aarons (US)
> Sent: Wednesday, August 09, 2006 11:12 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Unity 4.0(4) failover license key?
> 
> 
> Will the original license file on the Primary be replaced 
> with a single lic file? Or does this new .lic file just add 
> Failover to existing and they will have two .lic files on Primary?
> 
> -----Original Message-----
> From: tomlemay at adelphia.net [mailto:tomlemay at adelphia.net]
> Sent: Wednesday, August 09, 2006 11:56 AM
> To: Jason Aarons (US)
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Unity 4.0(4) failover bundle with 
> Exchange 2000
> 
> Regarding the license  key, you do need to run the failover 
> license key on the  primary server in order to inform the 
> primary that there is a secondary failover server configured.
> 
> You also need to run the telephony integration manager on the 
> failover unity so that the ports on the  failover unity will 
> register with the Cisco Call manager.  As mentioned earlier, 
> the ports on the secondary failover server have to be 
> different in terms of extension numbers (they can be phantom 
> numbers or DID).
> 
> Tom
> ---- "Jason Aarons (US)" <jason.aarons at us.didata.com> wrote: 
> > Funny, I'm about to do my first failover setup this Thursday and
> Friday,
> > and putting in production on Saturday pm.
> > 
> > >From reading the guides;
> > Cisco Unity Faillover Configuration and Administration 
> Guide.pdf Cisco 
> > Unity Reconfiguration and Upgrade.pdf
> > 
> > 
> > I assume the below;
> > 
> > 1) Just building another server, the 3 Unity service accounts need
> same
> > username/password are Primary Server
> > 2) Voicemail Ports Secondary Server are different then 
> Primary Server
> > 3) new Server has different ip address, different hostname
> > 4) Make sure they have recent DiRT backup of Primary Server
> > 5) Make sure they have recent Veritas backup of Primary Server
> > 6) Need to upgrade Primary from MSDE to SQL 2000 before 
> building new 
> > Secondary.
> > 
> > Do you know if the license key (*.lic) of the Primary 
> Server needs to 
> > change?
> > 
> > -----Original Message-----
> > From: cisco-voip-bounces at puck.nether.net
> > [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Simon, Bill
> > Sent: Wednesday, August 09, 2006 10:47 AM
> > To: Cisco Voip
> > Subject: [cisco-voip] Unity 4.0(4) failover
> > 
> > Looking for any special install notes/gotchas from people who have
> setup
> > 
> > Unity 4 in a failover situation.  We're preparing to do it this
> weekend.
> > 
> >   Engineering group tested it but I just want to see if any of you 
> > encountered anything that strayed from Cisco's docs or your
> common-sense
> > 
> > expectations.
> > 
> > Thanks
> > Bill
> > 
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> > 
> > -----------------------------------------
> > Disclaimer:
> > 
> > This e-mail communication and any attachments may contain 
> confidential 
> > and privileged information and is for use by the designated 
> > addressee(s) named above only.  If you are not the intended 
> addressee, 
> > you are hereby notified that you have received this 
> communication in 
> > error and that any use or reproduction of this email or its 
> contents 
> > is strictly prohibited and may be unlawful.  If you have 
> received this 
> > communication in error, please notify us immediately by replying to 
> > this message and deleting it from your computer. Thank you.
> > 
> > 
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> 
> -----------------------------------------
> Disclaimer:
> 
> This e-mail communication and any attachments may contain 
> confidential and privileged information and is for use by the 
> designated addressee(s) named above only.  If you are not the 
> intended addressee, you are hereby notified that you have 
> received this communication in error and that any use or 
> reproduction of this email or its contents is strictly 
> prohibited and may be unlawful.  If you have received this 
> communication in error, please notify us immediately by 
> replying to this message and deleting it from your computer. 
> Thank you.
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip



More information about the cisco-voip mailing list