[cisco-voip] trying to get caller id to show up on fxo lines

[Ted Nugent]

You running H323, MGCP?
CLID is only supported on H323 and it must be a
VIC-2FXO-M1 or higher.

--- James Grace <jgrace at digitel.net> wrote:

> We just move from a Nortel system, and we are using
> 4 analog line (fxo) .
> all works except for the incoming caller id.  Out
> going caller id is fine.  
> 
>  
> 
>  voice-port 0/1/0
> 
>  connection plar 750
> 
>  caller-id enable
> 
> !
> 
> voice-port 0/1/1
> 
>  connection plar 750
> 
>  caller-id enable
> 
> !
> 
> voice-port 0/1/2
> 
>  connection plar 750
> 
>  caller-id enable
> 
> !
> 
> voice-port 0/1/3
> 
>  connection plar 750
> 
>  caller-id enable
> 
>  
> 
> any body have some sugestions
> 
>  
> 
> James D. Grace 
> 
> CCNP CCNA MCSE MCSA 
> 
> Digitel Corporation
> 
> System Engineer / Professional Svc.
> 
> MSN messenger ID:  jgrace29 at hotmail.com
> 
> Mac IChat ID:  jgrace29 at mac.com
> 
>  
> 
>  
> 
> > _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com