[cisco-voip] trying to get caller id to show up on fxo lines

[James Grace]

Here are my dial peers

 

dial-peer voice 1 voip

 description ** cue voicemail pilot number **

 destination-pattern 700

 session protocol sipv2

 session target ipv4:10.1.15.226

 incoming called-number 700

 dtmf-relay sip-notify

 codec g711ulaw

 no vad   

!         

dial-peer voice 10 pots

 corlist outgoing loc-LD-800-only-css

 translation-profile outgoing outgoingCID

 preference 3

 destination-pattern 9[2-9].........$

 port 0/1/0

 forward-digits 10

!         

dial-peer voice 12 pots

 corlist outgoing loc-LD-800-only-css

 preference 3

 destination-pattern 911

 port 0/1/0

 forward-digits all

!         

dial-peer voice 13 pots

 corlist outgoing loc-LD-800-only-css

 preference 3

 destination-pattern 9911

 port 0/1/0

 forward-digits 3

!         

dial-peer voice 14 pots

 corlist outgoing loc-LD-800-only-css

 translation-profile outgoing outgoingCID

 preference 3

 destination-pattern 91[2-9]..[2-9]......$

 port 0/1/0

 forward-digits 11

!         

dial-peer voice 15 pots

 corlist outgoing Unrestricted-css

 translation-profile outgoing outgoingCID

 preference 3

 destination-pattern 9011T

 port 0/1/0

 prefix 011

!

dial-peer voice 2 voip

 description ** cue auto attendant number **

 destination-pattern 750

 session protocol sipv2

 session target ipv4:10.1.15.226

 dtmf-relay sip-notify

 codec g711ulaw

 no vad

!

dial-peer voice 3 voip

 description ** cue gms number **

 destination-pattern 760

 session protocol sipv2

 session target ipv4:10.1.15.226

 dtmf-relay sip-notify

 codec g711ulaw

 no vad

!

dial-peer voice 4 pots

 translation-profile incoming operator

 destination-pattern 0

 incoming called-number 0$

 no digit-strip

 

  _____  

From: James Grace [mailto:jgrace at digitel.net] 
Sent: Wednesday, August 09, 2006 7:43 PM
To: 'cisco-voip at puck.nether.net'
Subject: trying to get caller id to show up on fxo lines

 

We just move from a Nortel system, and we are using 4 analog line (fxo) .
all works except for the incoming caller id.  Out going caller id is fine.  

 

 voice-port 0/1/0

 connection plar 750

 caller-id enable

!

voice-port 0/1/1

 connection plar 750

 caller-id enable

!

voice-port 0/1/2

 connection plar 750

 caller-id enable

!

voice-port 0/1/3

 connection plar 750

 caller-id enable

 

any body have some sugestions

 

James D. Grace 

CCNP CCNA MCSE MCSA 

Digitel Corporation

System Engineer / Professional Svc.

MSN messenger ID:  jgrace29 at hotmail.com

Mac IChat ID:  jgrace29 at mac.com

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060809/891993df/attachment-0001.html