[cisco-voip] 0x82AC - Requested circuit/channel not available

[Nesen Kisten (ZA)]

Hi All,
 
I configured my voice gateway with MGCP I can receive calls in fine, but when I try callin out
 
I get 0x82AC - Requested circuit/channel not available
 
        Sending Complete
        Bearer Capability i = 0x8890
                Standard = CCITT
                Transer Capability = Unrestricted Digital
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA9839F
                Exclusive, Channel 31
        Called Party Number i = 0x81, '0027843555674'
                Plan:ISDN, Type:Unknown
Aug 11 19:46:54.782 GMT: ISDN Se0/2/0:15 Q931: RX <- RELEASE_COMP pd = 8  callre
f = 0x8007
        Cause i = 0x82AC - Requested circuit/channel not available
 
 
Thanks in Advance
 
Nesen

This email and all contents are subject to the following disclaimer:

"http://www.dimensiondata.com/emaildisclaimer.htm"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060811/0f0d712d/attachment.html