[cisco-voip] RS232 cable pinout for Cisco 7914 module

[Turpin, Mark]

It looks like a 6 conductor straight through to me.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of jpablo.romero at ifxnw.com.ar
Sent: Thursday, August 10, 2006 8:09 PM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] RS232 cable pinout for Cisco 7914 module

Thanks for your help, but the problem is that the only cable I had is
lost, that´s why I´m posting this message to the list, to see if someone
could help with this information which I couldn´t find at Cisco web site.

> I don't have a cable in front of me, but you should be able to tell by
> looking at the colors and seeing if they are straight through.  If you
> have
> a cable tester capable of doing a wire map you could see what the cable is
> doing.
>
> On 8/10/06, Juan Pablo Romero - IFX AR <jpablo.romero at ifxnw.com.ar> wrote:
>>
>> Could anyone send me the pinout for the RS232 cable that the 7914 uses
>> to
>> connect against a 7960?
>> Thanks,
>>
>> JP



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip 
 
This electronic message is from a law firm. It may contain confidential or privileged information. If you received this transmission in error, please reply to the sender to advise of the error and delete this transmission and any attachments.
 
IRS Circular 230 Disclosure: To ensure compliance with requirements imposed by the IRS, we inform you that any U.S. federal tax advice contained in this communication (including any attachments) is not intended or written to be used, and cannot be used, for the purpose of (i) avoiding penalties under the Internal Revenue Code or (ii) promoting, marketing, or recommending to another party any transaction or matter addressed herein.