[cisco-voip] Unity/Exchange User Question

[Israel Lang]

Thanks Mark and Ed. That seems to have done the trick.

On 8/15/06, Ed Leatherman <ealeatherman at gmail.com> wrote:
>
> I believe for this we had a TAC initiated call in to microsoft support to
> get this working- so we always assumed it was supported. I can't understand
> why this isnt just part of standard docs for setting it up on CCO - seems
> like something that would be a common request.
>
>
> On 8/15/06, Turpin, Mark <mark.turpin at bryancave.com> wrote:
> >
> >   By the way, I've gotten in to a very long "discussion" with TAC &
> > AM/SE-related folks as to whether or not this is supported.
> >
> >
> >
> > We finally got a message of support, but it took a long time to get it
> > through to them that this would work….
> >
> >
> >
> > -Mark
> >
> >
> >  ------------------------------
> >
> > *From:* cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net]
> > *On Behalf Of *Ed Leatherman
> > *Sent:* Tuesday, August 15, 2006 10:31 AM
> >
> > *To:* Israel Lang
> > *Cc:* cisco-voip at puck.nether.net
> > *Subject:* Re: [cisco-voip] Unity/Exchange User Question
> >
> >
> >
> > Israel,
> >
> > The technet article our guys used was
> > http://www.microsoft.com/technet/prodtechnol/exchange/guides/DROpsGuide/c546887c-fc65-44be-9b5e-8206272194b5.mspx?pf=true
> >
> >
> > You are basically going to the users exchange advanced tab, clicking on
> > mailbox rights, and granting the SELF account associated external account
> > rights. One user at a time unless you script it.
> >
> > The exchange hotfix I mentioned in the previous message you have to call
> > microsoft to get. He said it was no hassle, you just have to reference the
> > KB article. 1800microsoft.
> >
> > Hope that helps,
> >
> > Ed
> >
> > On 8/15/06, *Israel Lang* <zephy316 at gmail.com> wrote:
> >
> > We have a number of departments that use CM and Unity VM-Only for their
> > telephony needs. However, they are on their own domains and for all intents
> > and purposes networks sans their phones. We recently got audited and one of
> > the concerns was these departments that had accounts that either had
> > passwords that didn't expire, passwords that hadn't been changed in a long
> > time, and/or accounts that hadn't logged into the system in months.
> >
> > My question is how do others handle users that only need
> > exchange/network accounts only for the purpose of VM?
> >
> > I have disabled some accounts in the past and have had mixed results at
> > best with the Unity Accounts working after doing so. Perhaps, I am just not
> > following the right procedure at all times to do this.
> >
> > Any help would be greatly appreciated.
> >
> >
> > --
> > Have a great day!!!!!!!!!!
> > zephy316_gmail.com
> >
> > Replace the _ with an @ symbol
> >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
> >
> >
> > --
> > Ed Leatherman
> > Senior Voice Engineer
> > West Virginia University
> > Telecommunications and Network Operations
> >
> > This electronic message is from a law firm. It may contain confidential
> > or privileged information. If you received this transmission in error,
> > please reply to the sender to advise of the error and delete this
> > transmission and any attachments.
> >
> > IRS Circular 230 Disclosure: To ensure compliance with requirements
> > imposed by the IRS, we inform you that any U.S. federal tax advice
> > contained in this communication (including any attachments) is not intended
> > or written to be used, and cannot be used, for the purpose of (i) avoiding
> > penalties under the Internal Revenue Code or (ii) promoting, marketing, or
> > recommending to another party any transaction or matter addressed herein.
> >
>
>
>
> --
> Ed Leatherman
> Senior Voice Engineer
> West Virginia University
> Telecommunications and Network Operations
>



-- 
Have a great day!!!!!!!!!!
zephy316_gmail.com

Replace the _ with an @ symbol
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060815/b48a3ced/attachment.html