[cisco-voip] CME Issue

[Israel Lang]

No change.

On 8/16/06, Richard van Berkel <Richard.vanBerkel at telindus.nl> wrote:
>
>  Under the telephony-services you can set the maximum redirects.
>
> Put that on 10 to try it out.
>
>
>
> Hope this helps
>
>
>
> Regards Richard,
>
>
>
> * <http://www.skype.com/go/download>*
>
>
>
>
>  ------------------------------
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Israel Lang
> *Sent:* woensdag 16 augustus 2006 16:59
>
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] CME Issue
>
>
>
> Have a customer with 3 analog lines coming into their office. 2811 router
> running CME 4 with IOS Version c2800nm-advipservicesk9-mz.124-9.T.bin
>
> Have the following voice port and dial-peers set up:
>
>
> voice-port 0/0/0
>  connection plar opx 7177
>  caller-id enable
> !
> voice-port 0/0/1
>  connection plar opx 7177
>  caller-id enable
> !
> voice-port 0/0/2
>  connection plar opx 7177
>  caller-id enable
> !
> dial-peer voice 1 pots
>  description ** FXO pots dial-peer **
>  destination-pattern 9911
>  port 0/0/0
>  forward-digits 3
> !
> dial-peer voice 2 pots
>  description ** FXO pots dial-peer **
>  destination-pattern 9T
>  port 0/0/0
> !
> dial-peer voice 3 pots
>  description ** FXO pots dial-peer **
>  preference 1
>  destination-pattern 9911
>  port 0/0/1
>  forward-digits 3
> !
> dial-peer voice 4 pots
>  description ** FXO pots dial-peer **
>  preference 1
>  destination-pattern 9T
>  port 0/0/1
> !
> dial-peer voice 5 pots
>  description ** FXO pots dial-peer **
>  preference 2
>  destination-pattern 9911
>  port 0/0/2
>  forward-digits 3
> !
> dial-peer voice 6 pots
>  description ** FXO pots dial-peer **
>  preference 2
>  destination-pattern 9T
>  port 0/0/2
>
> 7177 is pilot point for a hunt group and here is that config
>
> ephone-hunt 1 sequential
>  pilot 7177
>  list 5001, 5093, 5094, 5002, 5003
>  final 6001
>  max-timeout 40
>  timeout 15, 10, 10, 7, 7
>  statistics collect
>
> The problem lies in that when ever we get two calls and third call is made
> inbound or tried outbound the calling party gets a busy signal.
>
> I have physically called all the numbers individually and they all work
> therefore ruling out a line issue. All the FXO ports look good.
>
> Any help would be greatly appreciated.
>
>
>
>
>
>
>
>
>
>
>
> --
> Have a great day!!!!!!!!!!
> zephy316_gmail.com
>
> Replace the _ with an @ symbol
>
> ** <http://www.telindussymposium.com/>
>



-- 
Have a great day!!!!!!!!!!
zephy316_gmail.com

Replace the _ with an @ symbol
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060816/9e07c5d8/attachment.html