[cisco-voip] Trasfer to VM

[Ryan Ratliff]

You can enable onHook transfer so they can just ht transfer, dial the  
number, and hang up.
"On hook transfer enable" is the service parameter name.

-Ryan

On Aug 17, 2006, at 11:01 AM, Bill Riley III wrote:



I have a site that is having some difficulties with transferring a  
call to VM. I have it setup so when they want to transfer a call to  
VM they hit transfer, * and the four digit extension, then transfer  
again which drops the caller into the other persons VM. People are  
complaining that they can not hit transfer fast enough and the end  
user is not getting the entire VM box greeting. I need to see if I  
can insert a pause, or some other delay, after the last transfer has  
happened so the person can hear all of the opening greeting. I am  
running CCM 4.1.3sr3c and Unity 4.2.1.





Thanks



NOTICE: This electronic mail message and any files transmitted with  
it are intended exclusively for the individual or entity to which it  
is addressed. The message, together with any attachment, may contain  
confidential and/or privileged information. Any unauthorized review,  
use, printing, saving, copying, disclosure or distribution is  
strictly prohibited. If you have received this message in error,  
please immediately advise the sender by reply email and delete all  
copies.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip