[cisco-voip] Transcoder config

[Ocampo, Walter]

Good morning

This link may help you.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administra
tion_guide_chapter09186a00801ec5bf.html#42346

Transcoder it is use for the WAN sites where the bandwidth it is limited
and you can compress the voice by using transcoder. The transcoder takes
place in the gateways. 
The link will be very helpful.

Regards,

Walter Ocampo
System Network Analyst
Office of Information Technology 
540 S.E 3rd. Avenue, suite 300
Fort lauderdale, FL 33301
(954) 357-8041 Cell (954) 632 8228
wocampo at broward.org
 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Bob A. Bowie
Sent: Monday, August 21, 2006 10:21 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Transcoder config

I have a CCM 4.1.3 install on my lan/wan.  All wan site are configured
in 
the CCM as g729 codecs.
I am wondering what use is the transcoder config in the call manager
for? 
Also, where is the transcoding taking place
on the CM when there are 711 and 729 phones?  Is there a limitation
where I 
need to look at a hardware transcoder?
What is the typicla situations where a hw transcoder is needed?

Thanks
bob


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip