[cisco-voip] What controls how quickly MWI is resynced?

[Matt Slaga (US)]

Check your port configuration in Unity.  You have the ability to only
allow certain ports to send MWI, which is probably configured.

I would advise against allowing all 72 ports for MWI however.  If your
CEO decides to send a corporate-wide broadcast, the server may have to
light x thousand phones which could make unity inoperable until it was
complete.



-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Robert
Kulagowski
Sent: Tuesday, August 22, 2006 12:18 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] What controls how quickly MWI is resynced?

In a 72 port Unity 4.2(1) system, how come going to UTIM and performing 
a "Resync Now" doesn't use all 72 ports?  All the ports are available 
for MWI, but from watching the PortStatusMonitor it's only using Port 72

for the most part, and port 70 and 71 infrequently, so the resync (after

a failover to the secondary) seems to be taking a very long time. (At 17

minutes and still counting according to the eventvwr.)
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.