[cisco-voip] What controls how quickly MWI is resynced?

[Robert Kulagowski]

Matt Slaga (US) wrote:
> Check your port configuration in Unity.  You have the ability to only
> allow certain ports to send MWI, which is probably configured.

Unity and UTIM are both configured so that all 72 ports are available 
for MWI.  But again, in Port Status Monitor, I could see that only port 
72 was being used for the most part, with 70 and 71 with almost no 
activity.  Total time to resync was over 1 hour.

> I would advise against allowing all 72 ports for MWI however.  If your
> CEO decides to send a corporate-wide broadcast, the server may have to
> light x thousand phones which could make unity inoperable until it was
> complete.

Not an issue in our environment.