[cisco-voip] Cannot Pickup a Phone with DN belonging to a Line group.

[Aman Chugh]

Check out the Hunt pilot considerations
http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_implementation_design_guide_chapter09186a00806e8c1f.html#wp1043936


Aman

On 8/23/06, Anthony Kouloglou <akoul at dataways.gr> wrote:
>
>  Thanks
> Is this ceratain?
> because if it is, Cisco is unbelievable!!!
>
> Aman Chugh wrote:
>
> Call Pickup is not supported on Hunt Pilot .I am trying to find the doc on
> cco in which I read it.
>
> Thanks
> Aman
>
>
> On 8/23/06, Anthony Kouloglou <akoul at dataways.gr> wrote:
> >
> > Dear all,
> > i have the following simple situation on CCM 4.1.3sr3a:
> >
> > -One Call Pickup number 10 : all DNs have this Call Pick Number assigned
> >
> > -A Broadcast Line Group which includes only 2 DNs; the two switchboards
> > of the company: members are DNs 125, 126
> > -A hunt list including this Line Group
> > -A Hint Pilot number 200 containing the previous hunt list.
> >
> > When a call is directed directly at any DN of the company, anyone can
> > press the Pickup button and take the call.
> > When a call is directed to the Hunt Pilot number 200, no one can pickup
> > this call!!!
> > When i press the pickup button, the line button on the 7941 G-Ge phone
> > flashes and then nothing happens.
> >
> > Any ideas?
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060823/f8b04f96/attachment.html