[cisco-voip] managing the three ad accts for unified messaging (James Grace)

[Brad Lierman]

I also had a customer that was very picky about rights. You don't have
to give the accounts Domain Admin rights, but you will need an account
with Domain Admin rights to run permission wizard on. As far as the
Exchange rights, they were a little more relaxed on it and allowed us to
make them full exchange admin.

If you have multiple Unity Servers you will also need to run permission
wizard on each unity server to give it the local OS rights.

Hope this helps.

Thank you,
Brad Lierman
Senior Unified Communications Technology Engineer
CCDA, QOS, EVVOD, CIPT, and Cisco Unity Certified
Phone: 574-271-0900 ext.8217

 
This e-mail and attachments may contain confidential and/or privileged
information.
If you are not the intended recipient (or have received this e-mail in
error) please notify 
the sender immediately and destroy this e-mail. Any unauthorized
copying, disclosure 
or distribution of the material in this e-mail is strictly forbidden.
 
 

Message: 1
Date: Fri, 25 Aug 2006 12:54:29 -0400
From: "James Grace" <jgrace at digitelusa.net>
Subject: [cisco-voip] managing the three ad accts for unified
	messaging
To: <cisco-voip at puck.nether.net>
Message-ID: <200608251254.AA5767342 at mail.digitelusa.net>
Content-Type: text/plain; charset=us-ascii

can someone give me some good ideals on managing the 3 accts we setup
for unified messaging.  we have a tuff customer and they are concern
about the accts permissison.  Now ive always gave the three accts domain
admin rights.  aswell as act on behalve of the OS rights. and under
exchage delegation... give the admin/install acct full exchage right