[cisco-voip] CIPC-2-0-1a.loads - Does it exist?

[Ortiz, Carlos]

You said it works fine so I think you answered your own question.  I
think since it uses SCCP it should use the same load that any 797X
should use.  I have 2.0(1a) running and have not had to install any
additional phone loads.....

 

Carlos

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Stu Packett
Sent: Thursday, August 31, 2006 1:36 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CIPC-2-0-1a.loads - Does it exist?

 

I just downloaded IP Communicator 2.0(1a) and installed it on my laptop
and it works just fine, but don't I need to install the IP Communicator
phone load on the TFTP server?  My 'Device Defaults' currently shows
CIPC-1-1-3-0 under 'Cisco IP Communicator' and I would assume it should
show CIPC-2-0-1a under it.  I remember when I first installed version
1.1(3), I had to run some device package installation so I created the
files under the TFTP directory.  Is this not the case for version 2.0?
I can't seem to find (if it exists) the phone loads for CIPC 2.0.  Is
anyone experiencing the same thing I am?  Thanks in advance.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060831/1735c8a3/attachment-0001.html