[cisco-voip] TFTP server settings

Jason Aarons (US) jason.aarons at us.didata.com
Thu Aug 31 15:06:43 EDT 2006


That's a great looking billboard below your name, trying making it a
little larger   -jason

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Brad Lierman
Sent: Thursday, August 31, 2006 2:47 PM
To: Mike Lay (milay)
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] TFTP server settings

 

Thanks for the tip. I'll give it a try tonight.

 

Thank you,

Brad Lierman

Senior Unified Communications Technology Engineer

CCDA, QOS, EVVOD, CIPT, and Cisco Unity Certified

Phone: 574-271-0900 ext.8217

   

 

This e-mail and attachments may contain confidential and/or privileged
information.

If you are not the intended recipient (or have received this e-mail in
error) please notify 

the sender immediately and destroy this e-mail. Any unauthorized
copying, disclosure 

or distribution of the material in this e-mail is strictly forbidden.

 

________________________________

From: Mike Lay (milay) [mailto:milay at cisco.com] 
Sent: Thursday, August 31, 2006 2:45 PM
To: Brad Lierman
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] TFTP server settings

 

I would restart TFTP & if that does not resolve then I would restart DBL
on all nodes. Depending on what version of CM you are running there may
be a cnage notification but or TFTP bug keeping this node from being
updated but a restart of the services should get you started. If this
does not work then go into the TFTP settings for the node giving the old
data & set ti to not cache BIN files & config then restart TFTP. Then
Set the TFTP to cache bin's & config & restart again.

 

Mike

 

________________________________

From: Brad Lierman [mailto:bradl at nsi1.com] 
Sent: Thursday, August 31, 2006 1:38 PM
To: Mike Lay (milay)
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] TFTP server settings

I have done that, but it appears that the configs on the subscriber at
site B are old... I changed a config for a phone at site B, when I reset
it, it came back up with the same config... However, when I changed the
TFTP option back to Site A it pulled the new config... Change back to
Site B and I get the old config. It's like site B's TFTP doesn't get
updated...

 

 

Thank you,

Brad Lierman

Senior Unified Communications Technology Engineer

CCDA, QOS, EVVOD, CIPT, and Cisco Unity Certified

Phone: 574-271-0900 ext.8217



 

This e-mail and attachments may contain confidential and/or privileged
information.

If you are not the intended recipient (or have received this e-mail in
error) please notify 

the sender immediately and destroy this e-mail. Any unauthorized
copying, disclosure 

or distribution of the material in this e-mail is strictly forbidden.

 

________________________________

From: Mike Lay (milay) [mailto:milay at cisco.com] 
Sent: Thursday, August 31, 2006 2:35 PM
To: Brad Lierman; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] TFTP server settings

 

Enable TFTP on the required nodes, install any device loads that need
updated on each node, & then on the DHCP server for each location set
option 150 to point to the local CCM Node.

 

Mike

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Brad Lierman
Sent: Thursday, August 31, 2006 1:29 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] TFTP server settings

Hopefully someone can give me a clearer answer than the Cisco guides on
setting up TFTP. I have a customer that has three Call Manager servers;
two of them are in one location (site A) and subscriber at another
location (Site B). Sites A and B are the two main sites and connected by
DS3. Both have several smaller sites connected to them by T1s. I would
like all the sites connected to Site B to pull their configurations and
loads from Site B's Call Manager. From what I've read in the
documentation on CCO I would need to configure the TFTP service
parameters for Site A's publisher and Site B's subscriber, but it's not
very clear to me what I need to do...

 

Any help would be greatly appreciated.

 

 

Thank you,

Brad Lierman

Senior Unified Communications Technology Engineer

CCDA, QOS, EVVOD, CIPT, and Cisco Unity Certified

Phone: 574-271-0900 ext.8217



 

This e-mail and attachments may contain confidential and/or privileged
information.

If you are not the intended recipient (or have received this e-mail in
error) please notify 

the sender immediately and destroy this e-mail. Any unauthorized
copying, disclosure 

or distribution of the material in this e-mail is strictly forbidden.

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060831/f28fbeec/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 1792 bytes
Desc: image001.gif
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20060831/f28fbeec/attachment-0001.gif 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 4661 bytes
Desc: image002.jpg
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20060831/f28fbeec/attachment-0002.jpe 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 2164 bytes
Desc: image003.jpg
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20060831/f28fbeec/attachment-0003.jpe 


More information about the cisco-voip mailing list