[cisco-voip] SMDI

[Jason Aarons (US)]

SMDI uses Serial Interface/COM port with Cisco Message Interface.
 
Google SMDI it's fairly standard but limited use due to serial limitations (distance, etc). 
 
I would try and find integration method other than SMDI, eg QSIG or DP-7630 (Octel).

________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of Wydra, Jason
Sent: Fri 12/1/2006 5:53 PM
To: cisco voip
Subject: [cisco-voip] SMDI



Can SMDI be passed over a T1 CAS or PRI to a legacy voicemail system? I noticed with CCM 4.1.3 there is are settings on the gateway config page for SMDI. Just curious if anyone has done this. I even noticed the setting on an MGCP FXS port??

 

Thanks,

 

Jason Wydra

Berbee

Cisco Voice Engineer

8725 West Higgins Road, Suite 700

Chicago, Il. 60631

IP phone 773.867.6084

Cell 630-209-9792

Jason.Wydra at berbee.com

www.berbee.com

 

 

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061203/c145bda8/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 2615 bytes
Desc: image001.jpg
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20061203/c145bda8/attachment-0001.jpe