[cisco-voip] Meridian Call Routing

[Jonathan Charles]

Are you saying to route all calls to the CCM, and then route the individual
blocks back to Nortel, or vice-versa? I have no idea how the Meridian works,
the PBX guy is uncooperative (he knows he is losing his job and he has no
interest in learning "that networking crap" too bad for him)...

On the Meridian, can we route the individual DIDs that are over on CCM back
out to a QSIG trunk though?



Jonathan

On 12/4/06, Mike Lay (milay) <milay at cisco.com> wrote:
>
>  It can be done but will be a very ugly Route plan in CCM! I would
> recommend that you implement some type of prefix in the NT & the CM until
> the migration is complete. After the migration is complete the prefix will
> not be needed & you may return to a more simple dial plan.
>
> Mike
>
>  ------------------------------
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Jonathan Charles
> *Sent:* Monday, December 04, 2006 10:27 AM
> *To:* cisco voip
> *Subject:* [cisco-voip] Meridian Call Routing
>
> Customer is migrating (way too slowly) from Meridian to VoIP
> (CallManager).
>
> Customer has around 300 phones, they want to move 50 phones over to
> CallManager (already in place), but the phones are random (I cannot figure
> out how they were picked).
>
> These 100 phones are intermixed (DID-wise, so extensions 2940-2340 are on
> the PBX, 2341, will be moved, 2342 will stay on the PBX, etc...) all calls
> come in on six PRIs, which are connected to the Meridian... Selecting a
> contiguous range of DIDs is not an option.
>
> Can I route individual DIDs over a QSIG trunk to the CCM? (IOW, call comes
> into PBX for x2341, gets routed over QSIG to 2851 for CCM)? Or only blocks?
>
>
>
> Thanx...
>
>
>
> Jonathan
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061204/db3c919e/attachment.html