[cisco-voip] Meridian Call Routing

[Voll, Scott]

I'm setup in the opposite direction....... CM is connected to the PSTN
and the PBX is behind the CM.  Then I just setup a Route Pattern of xxxx
to go to the PBX.  Anything CM doesn't know goes to the PBX.

 

Will they let you get in front of the PBX?

 

Scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan
Charles
Sent: Monday, December 04, 2006 8:27 AM
To: cisco voip
Subject: [cisco-voip] Meridian Call Routing

 

Customer is migrating (way too slowly) from Meridian to VoIP
(CallManager).

Customer has around 300 phones, they want to move 50 phones over to
CallManager (already in place), but the phones are random (I cannot
figure out how they were picked). 

These 100 phones are intermixed (DID-wise, so extensions 2940-2340 are
on the PBX, 2341, will be moved, 2342 will stay on the PBX, etc...) all
calls come in on six PRIs, which are connected to the Meridian...
Selecting a contiguous range of DIDs is not an option. 

Can I route individual DIDs over a QSIG trunk to the CCM? (IOW, call
comes into PBX for x2341, gets routed over QSIG to 2851 for CCM)? Or
only blocks?



Thanx...



Jonathan

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061204/b4a1d251/attachment-0001.html