[cisco-voip] Meridian Call Routing

[Fred Nielsen]

This is correct, we've done this plenty, with installations up to the 5000
handset range.  It eventually will get real ugly on the Nortel end of
things, but since that system is phasing out, not a huge deal here I would
think.
 
-- Fred Nielsen

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Vince Loschiavo
Sent: Monday, December 04, 2006 9:05 AM
To: Mike Lay (milay); Jonathan Charles; cisco voip
Subject: Re: [cisco-voip] Meridian Call Routing


I disagree.  You can just route the DIDs you want from the Nortel to CCM
over the QSIG.  You don't have to route the whole block.  As you migrate one
user from the Nortel to CCM, you route his DID on the Nortel.

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike Lay (milay)
Sent: Monday, December 04, 2006 11:33 AM
To: Jonathan Charles; cisco voip
Subject: Re: [cisco-voip] Meridian Call Routing


It can be done but will be a very ugly Route plan in CCM! I would recommend
that you implement some type of prefix in the NT & the CM until the
migration is complete. After the migration is complete the prefix will not
be needed & you may return to a more simple dial plan.
 
Mike

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan Charles
Sent: Monday, December 04, 2006 10:27 AM
To: cisco voip
Subject: [cisco-voip] Meridian Call Routing


Customer is migrating (way too slowly) from Meridian to VoIP (CallManager).

Customer has around 300 phones, they want to move 50 phones over to
CallManager (already in place), but the phones are random (I cannot figure
out how they were picked). 

These 100 phones are intermixed (DID-wise, so extensions 2940-2340 are on
the PBX, 2341, will be moved, 2342 will stay on the PBX, etc...) all calls
come in on six PRIs, which are connected to the Meridian... Selecting a
contiguous range of DIDs is not an option. 

Can I route individual DIDs over a QSIG trunk to the CCM? (IOW, call comes
into PBX for x2341, gets routed over QSIG to 2851 for CCM)? Or only blocks?



Thanx...



Jonathan

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061204/c596c291/attachment.html