[cisco-voip] Unity MWI and multiple integrations

[Lelio Fulgenzi]

MWIs are sent out to both integrations regardless of port assignment. Unfortunately, Unity does not know which CallManager cluster a subscriber belongs to, so it has to send the MWI out to both systems.


--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"I can eat fifty eggs." "Nobody can eat fifty eggs."
  ----- Original Message ----- 
  From: Nathan Reeves 
  To: cisco-voip at puck.nether.net 
  Sent: Tuesday, December 05, 2006 6:32 AM
  Subject: [cisco-voip] Unity MWI and multiple integrations


  Unity Q wrt MWI.

  Got Unity configured with two callmanagers.  All is working okay, but
  every now and again I see MWI dialout's for CallManager A going out
  the Ports assigned to CallManager B.  This causes the port to go
  offline while it keeps trying to dial over and over again.

  Any ideas on how I can fix this?  I can't see any way of marking a
  subscriber as being on A or B specifically in the system or subscriber
  profiles.

  Any ideas appreciated.

  thanks

  Nathan
  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061205/f0a6b5d4/attachment.html