[cisco-voip] Unity MWI and multiple integrations

[Nathan Reeves]

If a port is dialling the MWI over and over for a extension, is it
waiting for a confirmation / successful dial before it stops retrying?

On 12/5/06, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
>
> MWIs are sent out to both integrations regardless of port assignment.
> Unfortunately, Unity does not know which CallManager cluster a subscriber
> belongs to, so it has to send the MWI out to both systems.
>
>
> --------------------------------------------------------------------------------
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "I can eat fifty eggs." "Nobody can eat fifty eggs."
>
> ----- Original Message -----
> From: Nathan Reeves
> To: cisco-voip at puck.nether.net
> Sent: Tuesday, December 05, 2006 6:32 AM
> Subject: [cisco-voip] Unity MWI and multiple integrations
>
> Unity Q wrt MWI.
>
> Got Unity configured with two callmanagers.  All is working okay, but
> every now and again I see MWI dialout's for CallManager A going out
> the Ports assigned to CallManager B.  This causes the port to go
> offline while it keeps trying to dial over and over again.
>
> Any ideas on how I can fix this?  I can't see any way of marking a
> subscriber as being on A or B specifically in the system or subscriber
> profiles.
>
> Any ideas appreciated.
>
> thanks
>
> Nathan
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>