[cisco-voip] Unity MWI and multiple integrations

[Wydra, Jason]

It would be nice if they figured out how to make Unity partition
aware!!!!

 

Jason Wydra

Berbee

Cisco Voice Engineer

8725 West Higgins Road, Suite 700

Chicago, Il. 60631

IP phone 773.867.6084

Cell 630-209-9792

Jason.Wydra at berbee.com

www.berbee.com

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Tuesday, December 05, 2006 5:19 PM
To: Nathan Reeves
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Unity MWI and multiple integrations

 

Not sure why you would see it dialing over and over again. You should
only see it at most X times where X is the number of integrations, and
even then it will happen on different ports. MWI is a best effort
protocol, it simply asks CallManager to dial the MWI number on behalf of
an extension. 

 

Again, as far as I know.

 

	----- Original Message ----- 

	From: Nathan Reeves <mailto:nathan.a.reeves at gmail.com>  

	To: Lelio Fulgenzi <mailto:lelio at uoguelph.ca>  

	Cc: cisco-voip at puck.nether.net 

	Sent: Tuesday, December 05, 2006 6:12 PM

	Subject: Re: [cisco-voip] Unity MWI and multiple integrations

	 

	If a port is dialling the MWI over and over for a extension, is
it
	waiting for a confirmation / successful dial before it stops
retrying?
	
	On 12/5/06, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
	>
	> MWIs are sent out to both integrations regardless of port
assignment.
	> Unfortunately, Unity does not know which CallManager cluster a
subscriber
	> belongs to, so it has to send the MWI out to both systems.
	>
	>
	>
------------------------------------------------------------------------
--------
	> Lelio Fulgenzi, B.A.
	> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario
N1G 2W1
	> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
	>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
	> "I can eat fifty eggs." "Nobody can eat fifty eggs."
	>
	> ----- Original Message -----
	> From: Nathan Reeves
	> To: cisco-voip at puck.nether.net
	> Sent: Tuesday, December 05, 2006 6:32 AM
	> Subject: [cisco-voip] Unity MWI and multiple integrations
	>
	> Unity Q wrt MWI.
	>
	> Got Unity configured with two callmanagers.  All is working
okay, but
	> every now and again I see MWI dialout's for CallManager A
going out
	> the Ports assigned to CallManager B.  This causes the port to
go
	> offline while it keeps trying to dial over and over again.
	>
	> Any ideas on how I can fix this?  I can't see any way of
marking a
	> subscriber as being on A or B specifically in the system or
subscriber
	> profiles.
	>
	> Any ideas appreciated.
	>
	> thanks
	>
	> Nathan
	> _______________________________________________
	> cisco-voip mailing list
	> cisco-voip at puck.nether.net
	> https://puck.nether.net/mailman/listinfo/cisco-voip
	>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061205/1ae69f25/attachment-0001.html