[cisco-voip] HELP!!!! Connection to a Nortel option 11

Vince Loschiavo VLoschiavo at data-corporation.com
Wed Dec 6 13:30:55 EST 2006


You should be seeing something like this:
Layer 1 status active.
Layer 2 status MULTIPLE_FRAME_ESTABLISHED

Since you are seing layer 1 DEACTIVATED, I'd say you have a physical
connectivity problem.  I'd also guess that you don't have a Carrier
Detect (CD) light lit on that interface.
 
If the above is true, then I'd check the cabling.  I had a similar
problem.  The pairs were wired incorrectly.  My telco guy actually
figured it out and reended the cable.
 
I've got a call into him now to see what pairs he used.
 
 
 
 
ISDN Serial0/0/0:23 interface
        dsl 0, interface ISDN Switchtype = primary-dms100
        L2 Protocol = Q.921 0x0000  L3 Protocol(s) = CCM MANAGER 0x0003
    Layer 1 Status:
        ACTIVE
    Layer 2 Status:
        TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
    Layer 3 Status:
        0 Active Layer 3 Call(s)
    Active dsl 0 CCBs = 0
    The Free Channel Mask:  0x807FFFFF
    Number of L2 Discards = 0, L2 Session ID = 0
 
%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 1. Layer 3 output may
not apply

________________________________

From: Rogers, Jeremy (WMG) [mailto:Jeremy.Rogers at wmg.com] 
Sent: Wednesday, December 06, 2006 1:18 PM
To: Vince Loschiavo
Subject: RE: [cisco-voip] HELP!!!! Connection to a Nortel option 11

ISDN Serial0/0/0:23 interface

        dsl 0, interface ISDN Switchtype = primary-dms100

        L2 Protocol = Q.921 0x0000  L3 Protocol(s) = CCM MANAGER 0x0003

    Layer 1 Status:

        ACTIVE

    Layer 2 Status:

        TEI = 0, Ces = 1, SAPI = 0, State = AWAITING_ESTABLISHMENT

    Layer 3 Status:

        0 Active Layer 3 Call(s)

    Active dsl 0 CCBs = 0

    The Free Channel Mask:  0x807FFFFF

    Number of L2 Discards = 0, L2 Session ID = 10

 

%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 1. Layer 3 output may
not appl

y

 

ISDN Serial0/0/1:23 interface

        dsl 1, interface ISDN Switchtype = primary-dms100

        L2 Protocol = Q.921 0x0000  L3 Protocol(s) = CCM MANAGER 0x0003

    Layer 1 Status:

        DEACTIVATED

    Layer 2 Status:

        TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED

    Layer 3 Status:

        0 Active Layer 3 Call(s)

    Active dsl 1 CCBs = 0

    The Free Channel Mask:  0x00000000

    Number of L2 Discards = 0, L2 Session ID = 89

    Total Allocated ISDN CCBs = 0

 

Jeremy Rogers

Senior Telecom Analyst

Warner Music Group

75 Rockefeller Plaza

New York, NY 10019

212-275-2183

 
________________________________


From: Vince Loschiavo [mailto:VLoschiavo at data-corporation.com] 
Sent: Wednesday, December 06, 2006 1:16 PM
To: Rogers, Jeremy (WMG)
Subject: RE: [cisco-voip] HELP!!!! Connection to a Nortel option 11

 

can you include a show isdn status?

 

________________________________


________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Rogers, Jeremy
(WMG)
Sent: Wednesday, December 06, 2006 1:08 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] HELP!!!! Connection to a Nortel option 11



Im trying to connect a 2811 router to an option 11 system.  We can not
get the two systems to talk.  I have my PRI set as network side and
clocking internal.  The D channel will not come up on the Option 11 and
we get an error saying D channel release wrong mode.  Below is my router
config.  Can someone please tell me what I have wrong.  Cisco is not
being very helpful.

Were trying to get port 0/0/1 up.

 

version 12.4

service timestamps debug datetime localtime

service timestamps log datetime localtime

service password-encryption

!

hostname 2811_5digit

!

boot-start-marker

boot-end-marker

!

card type t1 0 0

card type t1 0 1

logging buffered 4096 informational

!

no aaa new-model

clock timezone EST -5

clock summer-time EDT recurring

network-clock-participate wic 0

network-clock-participate wic 1

!

!

ip cef

!

!

ip domain name wmg.com

isdn switch-type primary-dms100

!

voice-card 0

 no dspfarm

!

!

!

!

!

!

!

!

!

!

!

!

!

 

!

controller T1 0/0/0

 framing esf

 linecode b8zs

 pri-group timeslots 1-24 service mgcp

!

controller T1 0/0/1

 framing esf

 clock source internal

 linecode b8zs

 pri-group timeslots 1-24 service mgcp

!

controller T1 0/1/0

 framing esf

 linecode b8zs

!

controller T1 0/1/1

 framing esf

 linecode b8zs

!

!

!

interface FastEthernet0/0

 description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-FE 0/0$

 ip address 10.10.10.1 255.255.255.248

 duplex auto

 speed auto

!

interface FastEthernet0/1

 ip address 10.139.235.3 255.255.255.0

 duplex auto

 speed auto

!

interface Serial0/0/0:23

 no ip address

 encapsulation hdlc

 isdn switch-type primary-dms100

 isdn incoming-voice voice

 isdn bind-l3 ccm-manager

 no cdp enable

!

interface Serial0/0/1:23

 no ip address

 encapsulation hdlc

 isdn switch-type primary-dms100

 isdn incoming-voice voice

 isdn bind-l3 ccm-manager

 no cdp enable

!

!

!

ip http server

ip http access-class 23

ip http authentication local

ip http secure-server

ip http timeout-policy idle 60 life 86400 requests 10000

!

 

!

!

!

control-plane

!

!

!

voice-port 0/0/0:23

!

voice-port 0/0/1:23

!

ccm-manager fallback-mgcp

ccm-manager mgcp

ccm-manager music-on-hold

ccm-manager config server 10.139.235.145

!

mgcp

mgcp call-agent 10.139.235.145 2427 service-type mgcp version 0.1

mgcp dtmf-relay voip codec all mode out-of-band

mgcp rtp unreachable timeout 1000 action notify

mgcp package-capability rtp-package

mgcp package-capability sst-package

no mgcp timer receive-rtcp

mgcp sdp simple

mgcp fax t38 inhibit

mgcp rtp payload-type g726r16 static

mgcp bind control source-interface FastEthernet0/1

mgcp bind media source-interface FastEthernet0/1

!

mgcp profile default

!

!

!

dial-peer voice 1 pots

 service mgcpapp

 destination-pattern T

 progress_ind setup enable 3

 incoming called-number .

 direct-inward-dial

 port 0/0/1:23

!

 

!

line con 0

 login local

line aux 0

line vty 0 4

 access-class 23 in

 privilege level 15

 login local

 transport input telnet ssh

line vty 5 15

 access-class 23 in

 privilege level 15

 login local

 transport input telnet ssh

!

scheduler allocate 20000 1000

ntp clock-period 17180011

ntp update-calendar

ntp server 208.184.49.9

ntp server 18.145.0.30

!

end

 

2811_5digit#

 

Jeremy Rogers

Senior Telecom Analyst

Warner Music Group

75 Rockefeller Plaza

New York, NY 10019

212-275-2183

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061206/aaac588c/attachment-0001.html 


More information about the cisco-voip mailing list