[cisco-voip] abbrdial - any documentation about it

[Matthias Schaerer]

Hi Scott,

thanks for your reply, i probably did not word my question in a way to 
make it understandable. what i am interested in is the mechanism how the 
IP phone techically accesses the softkey for fastdials, i.e. if a skinny 
message is used or if a URL is invoked to access the configured user 
settings.

the reason why i ask is that in the softkey templates i do not find a 
fastdial key but on the phone it appears after dialing the first digit. so 
the most likely way is that SCCP is used, i will trace that when i find 
some time. my users want to have the possibility to use the fastdials 
while transferring calls or for the configuration of call forward all. in 
these situations the fastdial softkey does not show up an and i search for 
a way to trick the phone to display the key. but as i do not always have 
access to a testbed it will take some time to work that out.

thanks again for your answer, i'll keep the list updated on my findings.

regards
mat





"Voll, Scott" <Scott.Voll at wesd.org>
05.12.2006 17:08

 
        To:     "Matthias Schaerer" <matthias.schaerer at anyweb.ch>, 
<cisco-voip at puck.nether.net>
        cc: 
        Subject:        RE: [cisco-voip] abbrdial - any documentation about it




Each user can go into https://CM/ccmuser and enter speed dials.  The ones that don't show up on the phone are 
Abbrdial numbers.

 

For instance?.. I enter a number on line 8.   I dial 8 and the "abbrdial" 
softkey and it dials.

 

Hope that helps.

 

Scott

 




From:cisco-voip-bounces at puck.nether.net 
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Matthias Schaerer
Sent: Tuesday, December 05, 2006 7:37 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] abbrdial - any documentation about it

 


hi, 

does anybody have a technical document or an idea how cisco implemented 
abbrdial in the phone load? i desperately want to allow my users to use 
fastdials while transferring or entering call forward. i have read the 
previous threads about it but have only seen the suggestion to start a 
feature request with CIPTUG which seems to solve it. 

any hints welcome 
regards, 
mat
-----------------------------------------------------------------------------------
Matthias Schärer
Network Engineer, Instructor
Mob: +41 79 419 4557

http://www.anyweb.ch - All you want to know about taking care of networks is here.
http://www.anyweb-osys.ch - All you want to know about networking training is here.
(Don't be afraid to ask.)

In case of trouble with resending emails to me mailto:matthias.schaerer at anyweb.ch

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061207/6477771f/attachment.html