[cisco-voip] 2611xm to IVS 2000

[Graham, Darel]

Hello 

Here is my current problem child a NEC IVS 2000 with an E1 ISDN PRI in
Uruguay. 
Attached is the router configuration. 

The customer states that they can only select a few options. Here they
are:
NEC IVS2000 with a 30 PRTA board .
Command 3518 No Digit Conversion
                3589 NO CRC (Cyclic Redundancy Check)
                3502 Bothway route
                AA06 ETSI
                3002 ISDN Trunks
                3003 ISDN Trunks

The situation as it stands right now is that the customer in Uruguay can
make and complete calls to Miami.
But Miami cannot complete calls to Uruguay. We get the debug error
"Cause i = 0x81AC - Requested circuit/channel not available".

Here is the rub in the situation, while the Uruguay end is a PBX the
Miami end is a CCM. I have no configuration on the Miami end,
since it is pointed directly to the CCM from Uruguay. This type of
arrangement is currently working for another customer in South America
with a different vendor's pbx. But mostly the same configuration. 

What is wrong and how do I correct it? I am sure it is my mistake,
mostly because I am fairly new at this and have not had a full range of
experience.

Thank you for your assistance,
Darel


 <<2611xm.txt>> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061207/98755075/attachment-0001.html 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: 2611xm.txt
Url: https://puck.nether.net/pipermail/cisco-voip/attachments/20061207/98755075/attachment-0001.txt