[cisco-voip] ATA to Paging System Disconnect Timer

[Lelio Fulgenzi]

typically you use a paging adapter to accomplish this. We use the Bogen TAM-B without any problems.

  ----- Original Message ----- 
  From: Carter, Bill 
  To: cisco voip 
  Sent: Thursday, December 07, 2006 12:48 PM
  Subject: [cisco-voip] ATA to Paging System Disconnect Timer


  I have an ATA connected to an Analog Paging system.  When a user calls the paging system DN the page works, but the paging system does not hang up.  I believe through the ATA web interface I can change a setting to disconnect the line after a timeout.

  Where/What is this setting?




------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061207/8962be79/attachment.html