[cisco-voip] ATA to Paging System Disconnect Timer

[Jason Aarons (US)]

ATA will work with CME but not CCM. 

 

In general FXS has limited supervisory disconnect signaling.

 

Do it right, get a FXO port and something like a Valcom 2003A or
similar.

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Carter, Bill
Sent: Thursday, December 07, 2006 12:48 PM
To: cisco voip
Subject: [cisco-voip] ATA to Paging System Disconnect Timer

 

I have an ATA connected to an Analog Paging system.  When a user calls
the paging system DN the page works, but the paging system does not hang
up.  I believe through the ATA web interface I can change a setting to
disconnect the line after a timeout.

 

Where/What is this setting?

 

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061207/8f60f5ab/attachment.html