[cisco-voip] Hookflash transfer

[Wes Sisk]

Hookflash gateway works:
with t1-cas terminated on a 6608.  added in CM4.0.1, but it was  
pretty buggy then
http://www.cisco.com/en/US/products/sw/voicesw/ps556/ 
products_administration_guide_chapter09186a00801ec5cb.html#1067533

There was a later project to add support for t1-cas hookflash  
transfer for IOS mgcp gateway.  I do not recall exactly where this  
was added, but based on CSCsc06342 the feature is definitely present  
in CM4.2.


And it works with MGCP controlled FXS ports.  IT also works on vg248  
and stcapp ports on vg224.


For PRI - like integrations use QSIG diversion, trunk release, path  
replacement, etc.

/Wes

On Dec 10, 2006, at 5:18 AM, Wydra, Jason wrote:

Curious if hookflash transfer is supported with H323 and a 2851  
running CCM 4.1.3. I need to do it on both T1 CAS and PRI. From what  
I’ve been researching, it’s only possible with MGCP and T1-CAS (not  
PRI). Am I going to be stuck with MGCP? IOS 12.4.11T



Regards,



Jason Wydra

Berbee

Cisco Voice Engineer

8725 West Higgins Road, Suite 700

Chicago, Il. 60631

IP phone 773.867.6084

Cell 630-209-9792

Jason.Wydra at berbee.com

www.berbee.com



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061210/aaa97a68/attachment.html